Wire Saw Machine For Stone Squaring

Wire-Sawing Machine For Squaring
Advantages for stone wire saw machine of stone machine:
The machine is mainly used for processing the profile of marble and granite. it not only can process the arc slabs of different specifications, solid columns, hollow columns, large stone lines and English letter but also can process stone into polygon and the figure of buddha,special-shaped square column and so on for special-shaped stone.
Product Application

introduction of wire saw machine; 1,Machine has steady structure, including a crossbeam,two upright column,square box,air compressor tensioning unit,two big flywheel. Left side install a driven big flywheel and air compressor tensioning device. tensioning device controls diamond wire tension or loosen, meanwhile keep the diamond wire pressure. Right side install a driving flywheel and main motor, it can control the speed of wire via inverter. the machine can cut different kind of stone material ; 2,In order to reduce the diamond wire wear and keep the diamond wire steady , the machine are equiped with two guide wheels ; 3,Trolley move by Screw rod. Screw rod is soaked with oil in the protective cover of screw rod(Patent product) ; 4,The machine will stop automatically and display failures on the screen if wire broken ; 5.The machine has a water spray system ,if no water or not enough water AND the machine will automatically stop. All the electrical components are housed and wired in a electrical enclosure. This allows for easy access and service when needed.
All wiring is tagged so that when service is required, the customer can easily navigate the cabinet. In addition, the cabinet serves as a work bench for the tools required.

1.The machine has steady structure, including top beam,two upright column,square box,hydraulic station tensioning unit,two big fly wheel. Left side install a driven big flywheel and hydraulic station tensioning unit. tensioning device controls diamond wire tension or loosen, meanwhile keep the diamond wire pressure. Right side install a driving flywheel and main motor, it can control the speed of wire via inverter. the machine can cut different kind of stone material ; 2. This machine is controlled by four axis linkage PLC system. Machine lifting and trolley movement are controlled by servo system. Guide wheel rotating adopt step system ; 3. Operator can write program and enter cutting parameter in the PLC control panel. If there are any complex graphics, can draw graphics by AutoCAD and save as DXF format. the cnc system can read the DXF files and automatically make the program when put the U disk to the USB interface of cnc system ; 4. Trolley move by Screw rod. Screw rod is soaked with oil in the protective cover of screw rod(Patent product) ; 5. The machine will stop automatically and display failures on the screen if wire broken ; 6.the machine has a water spray system, if no water or not enough water and the machine will automatically stop ; 7. the rotating table is driven by servo motor,is controled by PLC system.