Active Member
|
[China]
Address: Virock Road 8, Wangcheng economy & technology development zone, Changsha, Hunan, China
Contact name:SHIRLEY WU
VIROCK TEXTILE PRINTING&DYEING MACHINERY CO.,LTD |
|
|
Gas heated Woven fabric finishing Stenter , Pin & clip combined , High production
1. Description:
2. Stenter functions:
* Heat setting and fix different kinds of textiles.
* To control the fabric width.
* To finishing chemical applying on various types of textile.
* To control the moisture of the textile.
* To control the GSM of the textile.
* To dry fabrics.
* To control the shrinkage of the textile.
* Curing treatment for resin, water repellent fabric is done.
3. Machine flow-chat:
Open-width fabric entry --- Cloth guider ---- J-scray ---- Padder mangle --- Various tension applicator --- Weft straightner ---- Expanding roller ---- Lower overfeeding --- Screw expending ---Upper overfeeding --- Pleva or E+L Photocell device & Two-finger edge uncurler device--- Clipping/pinning-on ---- Chambers for heat setting ---Air cooling unit--- Clipping/pinning -off ---- End section --- Plaiting & batching.
4. Technical specifications:
| Normal width: | 1400-3800mm | Working width: | 1200-3600mm
|
| Heat source: | naturegas/oil/ electricity
| Width adjustment range: | 700-3600mm
|
Chambers No.
| 2-10 | Temperature of chamber: | 100-230℃
|
| Fabric held by: | clip/pin/combined
| Air pressure: | above 0.5mpa |
| Overfeed range: | -10% to 30%
| Installed power: | Approx 120Kw
|
5. Feature advantages:
1) Temperature even: The temperature difference in each chamber is 2 degree.
2) High production: The air-volumn in each chamber is big, and the machine running speed is high.
3) High quality of finishing: The fabric is good hand-touch feeling.
4) Energy-saved: Gas consumption and power consumption is less.
