|
[China]
Trade Verify
Contact name:Ivy
Jiangsu Mingyuan Tower Co., Ltd. |
|
Verified Suppliers
|
|
|
132kv Galvanized Electric Power Steel Transmission Line Tower Pole 
| Height | 9m-100m |
| Suit for | Electric Power Transmission and Distribution |
| Shape | Polygonal or Conical |
| Material | Normally Q345B/A572, Minimum Yield Strength ≥ 345 N/mm² Q235B/A36 Minimum Yield Strength ≥ 235 N/mm² As well as Hot rolled coil from ASTM A572 GR65, GR50, SS400 |
| Power Capacity | 10kV to 220kV |
| Tolerance of the dimension | According to client’s requirement. |
| Surface treatment | Hot dip galvanized Following ASTM A 123, or any other standard by client required. |
| Joint of Poles | Slip joint, flanged connected |
| Standard | ISO 9001:2008 |
| Length of per section | Within 14 meter once forming |
| Welding Standard | AWS (American Welding Society ) D 1.1 |
| Thickness | 1 mmto 36mm |
| Production Process | Raw material test → Cutting →bending →Welding (longitudinal )→Dimension verify →Flange welding →Hole drilling →sample assemble → surface clean→ Galvanization or powder coating ,painting →Recalibration →Packages |
| Packages | Packing with plastic paper or according to client’s request. |
Transmission line poles
Transmission line poles and towers are tower structures used to
support and raise overhead conductors, lightning rods and other
accessories, so that conductors and conductors, poles and towers,
conductors and lightning rods, and conductors on the ground or
across objects to maintain a specified safe distance from the
towering structure.According to the purposes are: tension tower,
straight tower, corner tower, transposition tower (replacement of
wire phase position tower), terminal tower and spanning tower.
1. We can supply the product base on client required drawing ,but also can supply the design for any kinds of lamp poles electric poles ,street lighting poles, high mast poles,traffic light poles
2. Matercial :hot rolled coil from Q235 to Q460 ,ASTM573 GR65, GR50 ,SS400, SS490,ST52-3
3. Deal: Hot dip galvanized Following ASTM A 123 or any other stardand by client required.
4. Packing: Plastic bulble , Mat &Straw Bale or following client required
5. Length : within 11.8meters once forming( single section)
6. Thickness: from 1mm to 25mm
7. Shape: polygonal(6-side,8side,12-side,16side) round tapered.
8. 110KV to 220kv
9. Easy install and maintenance.
Excellent performance:
Because of the long and thin shape,closed polygonal section and apply of high strength steel material,these steel poles have excellent durability.they can withstand the extreme condition,such as the frost climate,unbalanced loads, or breaking of wire.
Installation
The designing weight of the steel poles are usually relatively light ,and is good for the operation,transportation,assemble and installation.
Environment
Since the long and thin straight line shape.the steel pole from Milkyway Steel Poles are easily intergrated into the landscape.At the protected areas(mountains),the installation of steel pole will not influence the aesthetic solution of the scenic spot.
Maintenance
The hot dip galvanization trearment can increase the service life of the steel polewithout the environmental pollution and no need for other daily maintance.The following described types are specially designed for Africa Market which can meet the regulated height and load standard of France electricity power company.
Production
our steel pole is bend to form to the polygonal(conical) section firstly.Then it is welded by the automatic submerged-arc welding machine.Thirdly the top cap,strip and base plate will be welded to the pole.And finally other accessories (support brackets ,ladder support,etc.)will be welded to the pole shaft.
Galvanization
The galvanization of the steel pole are under strict control.galvanization is achieved by immersion in a molten zinc bath(450°) after pre-treated(dipping)
1. Cutting 2, Bending 3, Welding 4,
Polishing 5,Galvanizing 6, Testing 7,
packing 8, Delivery
Jiangsu Mingyuan Tower Co., Ltd, established in 2009, is situated
in Yixing, Jiangsu Province, China, which is near Shanghai with
convenient transportation access. It owns the area of 63,000m2 and
the production area is about 20,000m2, with the annual output
capacity over 30,000 tons.
Our main products: power angular tower, combination tubular poles
tower, electric tubular pole, substation structure, iron
accessories, lightning rod tower and communications, microwave
tower.
We have 500kV transmission line tower, microwave communication
tower production license, 220kV power electric pole qualification
certificate of steel structure qualification certificates and
safety production license, railway steel structure product testing
qualified report, SGS inspection report, ISO9001, ISO14001, 18001.
Our foreign market is distributed in America, Europe, Australia,
southeast Asia, Philippines, Indonesia, Africa, the Middle East.
All of our products meet international quality standards and are
greatly appreciated a great reputation in a variety of different
markets.
FAQ
1. Payment Term: Typically 30% by T/T as deposit, balance by T/T or
L/C at sight before shipment.
.
