|
[China]
Trade Verify
Address: 420,NO74-8,NORTH STREET,YUHANG,HANGZHOU,ZHEJIANG,CHINA
Contact name:Ben
HANGZHOU NORVEE MACHINERY CO.,LTD |
|
Verified Suppliers
|
|
|
variable force SS 301 flat Spiral spring for vending machine with 500mm length
Springs'Specifications:
The constant force spring consists of strip material, which has been shaped and pre-tensioned into a tightly wound roll. The spring is used in a linear movement and produces almost constant force throughout its deflection. Constant force springs can be fitted in a number of ways and extended partly or completely. There is practically no limit on extension speed and acceleration.
| Material | Stainless steel,carbon steel,62Si2Mn,60Si2Mn,65Mn,SK4,SK5 |
| Load type | Constant and variable force |
| Thickness of material | 0.08mm~ 1.8mm |
| Wire diameter | 0.01mm~ 10mm |
| Width | 1mm~ 250mm |
| Inside diameter | As your request |
| Outside diameter | 1 mm and above. |
| Length of springs | Free length as you need |
| Surface treatment | Zinc plated, nickel plated, black coating,also can be done as customers request |
| Application | Furniture,industrial equipment,electronic devices,etc |
| Equipments | Advanced CNC computer spring machines with high precision and efficiency |
| Technology | Experienced engineers ,technicians and Skilled Workers |
| Certification | ISO9001:2008 |
| Advantage | High quality, competitive prices,automatic production equipment, , safe package and fast delivery |
Our service:
1. Can design for you
2. Advanced equipments of Springs
3. High quality with competitve price
4. Safe package
5. Fast delivery
Power springs are identified by the many coils of strip material stored in a case, barrel, or band, and connected to a central arbor or shaft. When this shaft is rotated, the material starts to wind flat against it. This action creates an increasing torque for as many turns as it can be wound until there is no material left.
Our capabilities of power springs range from 0.002 inch to 0.125 inch material thickness and from 0.030 inch to 3 inch material widths. Power springs can be made using pre-stressed (back wound) or conventional (from flat) methods. Pre-stressed power springs are spooled to a special free diameter and back wound into a housing or keeper, while conventional wound springs are manufactured and wound in the flat state. The advantages of pre-stressed springs are that it allows maximized torque from a specific material. Conventional wound power springs, however, offer increased cycle life.
· Tobacco shelf pusher
· seatbelt retractors
· tape measures
· retractable dog leads
· electrical cord retractors
· hose reels
· wind-up toys
· pull start on small gas-powered engines
· tool balancers
· valves
Specifications
Place of Origin:
Zhejiang, China (Mainland)
Brand Name:
NV or Customized
Model Number:
SS301
Style:
Spiral
Load Type:
Torsion
Material:
Stainless Steel
Usage:
Vendor, etc.
Samples:
Available
OEM Service:
Yes
Width:
1mm-250mm
Length:
Free length
Thickness of material:
0.08mm-2mm
Inside diameter:
According to your need
Outside diameter:
1mm and above
Surface Treatment:
No
Motor spring for circular motion in max 10 and 20 coils, except pre-tension as specified below. The spring is usually positioned in a housing with the outer hook located around a pin or in a slot on the housing with the smallest internal diameter as specified below. It can also be placed in a larger housing, but with an associated decrease in force.
The clock spring (also referred to as a flat torsion spring) is designed to produce a torsional force (circular movement). In contrast to the tightly coiled motor spring on the previous page, the clock spring has open coils that, when mounted correctly, reduces fricton to zero. However, torque capacity is reduced as a result. The standard range is made from rounded edge stainless steel, which affords a better fatigue life.
