Active Member
|
[China]
Address: 16-143, No. 26 Nankai Road Suofang Street, Xinwu Dist, Wuxi City
Contact name:Shawna
JIANGSU IRUNT STEEL GROUP CO., LTD. |
|
|
Astm A 192 CD seamless steel pipe And Tube hydraulic steel tube 63.5mm x 2.9mm boiler
Seamless steel pipe is perforated by the whole round steel, the surface of the steel pipe without weld, called seamless steel pipe. According to the production method, seamless steel tube can be divided into hot rolled seamless steel tube, cold rolled seamless steel tube, cold drawn seamless steel tube, extruded seamless steel tube, pipe jacking, etc. According to the shape of section, seamless steel tube is divided into round and special-shaped, special-shaped tube has square, oval, triangle, hexagonal, melon seed, star, winged tube and a variety of complex shapes. The maximum diameter is 900mm and the minimum diameter is 4mm. According to different uses, there are thick wall seamless steel pipe and thin wall seamless steel pipe. Seamless steel pipe is mainly used as petroleum geology drilling pipe, petrochemical cracking pipe, boiler pipe, bearing pipe and automobile, tractor, aviation high-precision structural steel pipe.
Product Description
1. SA179/SA192 CHEMICAL AND MECHANICAL COMPONENT:
| ASTM A179/(ASME SA179) | |
| Seamless Cold Drawn Low Carbon Steel Heat Exchanger And Conderser Tubes | |
| Application: | For tubular heat exchangers,condensers,and similar heat transfer apparatus. |
| Size(mm): | O.D.:6.0~114.0mm W.T.:1~15mm L:max 18000mm |
| Chemical Composition | C | Mn | P≤ | S≤ | Si≤ |
| 0.06-0.18 | 0.27-0.63 | 0.035 | 0.035 | 0.25 |
| OD In (mm) | + | - | WT In(mm) | + | - |
| <1(25.4) | 0.10 | 0.10 | ≤1.1/2(38.1) | 20% | 0 |
| 1~1.1/2(25.4~38.1) | 0.15 | 0.15 | >1.1/2(38.1) | 22% | 0 |
| >1.1/2~<2(38.1~50.8) | 0.20 | 0.20 | |||
| 2~<2.1/2(50.8~63.5) | 0.25 | 0.25 | |||
| 2.1/2~<3(63.5~76.2) | 0.30 | 0.30 | |||
| 3~4(76.2~101.6) | 0.38 | 0.38 | |||
| >4~7.1/2(101.6~190.5) | 0.38 | 0.64 | |||
| >7.1/2~9(190.5~228.6) | 0.38 | 1.14 |
ASTM A192/A192M-02 | |
| Seamless Carbon Steel Bolier Tubes for High-Pressure | |
| Application: | For seamless carbon steel bolier and superheater tubes for high-pressure service |
| Size(mm): | O.D.:6.0~114.0 W.T.:1~15 L:max 18000 |
| Chemical Composition | C | Mn | P≤ | S≤ | Si≤ |
| 0.06-0.18 | 0.27-0.63 | 0.035 | 0.035 | 0.25 |
| OD In (mm) | + | - | WT In(mm) | + | - |
| <1(25.4) | 0.10 | 0.10 | ≤1.1/2(38.1) | 20% | 0 |
| 1~1.1/2(25.4~38.1) | 0.15 | 0.15 | >1.1/2(38.1) | 22% | 0 |
| >1.1/2~<2(38.1~50.8) | 0.20 | 0.20 | |||
| 2~<2.1/2(50.8~63.5) | 0.25 | 0.25 | |||
| 2.1/2~<3(63.5~76.2) | 0.30 | 0.30 | |||
| 3~4(76.2~101.6) | 0.38 | 0.38 | |||
| >4~7.1/2(101.6~190.5) | 0.38 | 0.64 | |||
| >7.1/2~9(190.5~228.6) | 0.38 | 1.14 |
Detailed photots
ABOUT US
JIANGSU IRUNT STEEL GROUP CO., LTD is reputed at supplying Stainless Steel Pipe, Carbon Steel, Seamless Pipe,Alloy Steel Pipe, Hot-Rolled/Cold-Rolled Steel Pipe, Galvanized Steel Pipe, Welded Steel Pipe, Precision Steel Pipe, also supply Steel Plate, Steel Coil and Lead Sheet etc.
Our Company combined production, trade, the development of new products and services together, is one of the provincial large-scale iron and steel enterprises. Factory products standards are qualified to meet ISO/GB/ASTM/EN/BS/JIS etc.
The company is in the long-term development process, we are in cooperation with Baosteel Group, Tianjin Steel Group, Baotou Steel Group, Panzhihua Iron and Steel Group, Taiyuan Iron and Steel Group, Anshan Iron and steel Ling, Daye Steel Group and other well-known domestic mills,and established long-term friendly cooperative relations with not only the domestic groups, but also abroad relations, Assab special steel, Japan's Hitachi, Japan Datong Special and Germany Special Steel, Austria special steel and other well-known International groups.
Our company insists the principle of honesty and trustworthiness, has received trust and support from both the domestic and Internatonal manufacturers.
We will always adhere to the belief of credibility is the life to develop international market,and try our best to be skilled, highly responsible team, through win-win cooperation, to meet the brilliant tomorrow!
FAQ
Q:What is your terms of payment?
A:We usually accept T/T in advance, L/C for large sum.If you prefer other payments terms, please discuss.
Q:What is the terms of delivery?
A:EXW, FOB, CIF
Q:What is the terms of packing?
A:Generally, we pack our goods in bundles or coils with rods or belts, we could also pack the goods as the customers' requirements.
Q:What is your delivery time?
A:For products in stock, we can ship it within 7 days after receiving the deposit.For custom order, production time is 15-30 workdays after received the deposit.
Q:Could you produce according to the samples?
A:Yes, we could customer-made by your samples or technique drawings, we could build the mold and fixtures.
Q:Can I place an sample order and what is your MOQ if I accept your quality?
A:Yes, we can send you samples but you may pay the express fees, our MOQ is 1 ton.
Q:How could you guarantee your products?
A:We accept and support the third-party inspection.We also could issue the warranty to customer to guarantee the quality.
Q:Where is the port of shipment?
A:Ningbo or Shanghai sea port.
Q:How can I get the price of needed product?
A:It's the best way if you can send us the material, size and surface, so we can produce for u to check the quality.If you still have any confusion, just contact us, we would like to be helpful.
