Active Member
|
[China]
Address: 16-143, No. 26 Nankai Road Suofang Street, Xinwu Dist, Wuxi City
Contact name:Shawna
JIANGSU IRUNT STEEL GROUP CO., LTD. |
|
|
Slit Edge Industrial Black Steel Plate Nm360 Nm400 Wear Resistant Carbon Steel Sheet
| Grade | c | Si | Mn | P | S | Al | Cr+Ni+Mo | Nb+V+Ti |
| NM400 | 0.10-0.40 | 0.20-0.40 | 1.00-2.00 | Max 0.015 | Max 0.003 | Min 0.020 | Max 0.9 | Trace Amount |
| NM450 | 0.10-0.40 | 0.20-0.40 | 1.00-2.00 | Max 0.015 | Max 0.003 | Min 0.020 | Max 1.2 | |
| NM500 | 0.10-0.40 | 0.20-0.45 | 1.00-2.00 | Max 0.015 | Max 0.003 | Min 0.020 | Max 1.5 | |
| NM550 | 0.10-0.50 | 0.20-0.45 | 1.00-1.50 | Max 0.015 | Max 0.003 | Min 0.020 | Max 2.0 | |
| NM600 | 0.10-0.50 | 0.20-0.45 | 1.00-1.50 | Max 0.015 | Max 0.003 | Min 0.020 | Max 2.5 | |
| XCHD400 | 0.10-0.30 | 0.20-0.40 | 1.00-2.00 | Max 0.015 | Max 0.003 | Min 0.020 | Max 0.1 | |
| XCHD450 | 0.10-0.40 | 0.20-0.40 | 1.00-2.00 | Max 0.015 | Max 0.003 | Min 0.020 | Max 0.9 | |
| XCHD500 | 0.10-0.40 | 0.20-0.45 | 1.00-2.00 | Max 0.015 | Max 0.003 | Min 0.020 | Max 1.5 |
Application:
1) Thermal power plant: lining plate of medium speed pulverizer barrel, impeller shell of
fan, inlet flue of dust remover, ash duct, lining plate of bucket
wheel, connecting pipe of separator, lining plate of coal crusher,
lining plate of coal hopper and crusher, burner burner nozzle,
lining plate of coal hopper and funnel, air preheater support,
guide vane of separator. The above parts have no high requirements for the hardness and wear
resistance of the wear-resistant steel plate. The wear-resistant steel plate with the material of NM360 / 400 and
the thickness of 6-10 mm can be used.
2) Coal Yard: feed chute and hopper lining, hopper lining, fan
blade, pusher bottom plate, cyclone dust collector, coke guide
lining, ball mill lining, bit stabilizer, screw feeder bell and
base, Kneader bucket lining, ring feeder, tipper bottom plate. The working environment of the coal yard is very bad, so it has
certain requirements for the corrosion resistance and wear
resistance strength of the wear-resistant steel plate. It is recommended to use the nm400 / 450 wear-resistant steel plate
with a thickness of 8-26mm.
