Home Companies RISHBIN CO., LTD

Ф220mm Steel Coil Slitting Line , Aluminum Slitter Machine Hot Rolled Easy Operation

Active Member

Contact Us

[China]

Address: No. 10, Jingshi Rd, Wuxi, China

Contact name:Chris Ho

RISHBIN CO., LTD

Ф220mm Steel Coil Slitting Line , Aluminum Slitter Machine Hot Rolled Easy Operation

Country/Region	china
City & Province	wuxi jiangsu

Product Details

RS0.2-1.8 5-15 Strips Light Gauge Steel Slitting Line PLC Automatic control Ф220mm

Light Gauge Slitting Lines introduction

In the beginning, the coil is loaded on the coil car by crane and brought to the uncoiler by operating the coil car. Coil car centralizes the coil with the uncoiler mandrel and the coil is mounted on the uncoiler. Mandrel is expanded. Snubber roll rotates the coil. Peeler breaks the straps and brings the pre end upto Pinch roll. The Pinch roll drives the coil end upto the slitter. Then its drive is disconnected. Slitter moves the slitted strips further. Slitted strips are threaded through loop table and drag tensioner into the recoiler drum. Recoiler winds one turn on loose coil.

Then drag tensioner and loop are put into operation. Slitter and recoiler run simultaneously in synchronization. As the coil build up, the recoiler rpm correspondingly goes down to keep desired constant line speed. This process goes on until the end of coil on uncoiler. The slitted coil is pushed on the exit coil car through a pusher plate operated by hydraulic cylinder. The side slitted scrap is wound on the scrap winder units provided on both sides of the slitter.

Steel Slitting Line Machine Operating Procedure

Preparatory work before steel slitting machine production
1. Before the formal production, the dust and dirt and other foreign matter on the surface of the equipment and the coil should be carefully cleaned to keep the equipment and the ground floor and articles clean. At the same time, all rollers on the guide road which the strip passes should be carefully cleaned. When necessary, it needs to be polished with sandpaper and then wiped clean with alcohol to ensure that the surface of the finished product is free from scratch and other defects caused by this process.

2. Check the mechanical and electrical system of the steel slitting equipment according to the equipment inspection table, and operate the equipment in an empty state to confirm that the equipment is in a normal and power-on state.

3. Check whether the production card is consistent with the batch number, alloy status, specification size and weight of the material coil; According to the quality and acceptance criteria of steel slitting linemachine, check whether the surface quality and end face quality of the pending coil meet the needs of production. Before starting the equipment, the crew must comply with the requirements for machine maintenance and operation. After carefully checking all parts of the body, they can send electricity, otherwise they are not allowed to start the equipment.

4. The blanks and finished products parameters are correctly input in the control procedures of the main operation console of the equipment, such as incoming material thickness, incoming width, finished product width, and finished product length. According to the width of incoming material and finished product, calculate the required cutting width and adjust the tool distance. Meanwhile, the number of pieces per stack is calculated according to the requirement of production card.

RISHBIN, one of the best steel slitting machine manufacturers with the high-quality steel slitting lines for sale, was founded in 1999. With almost twenty years development, it has become a leading steel slitting company in this field and exports its quality slitting machine for steel and other materials to the world. RISHBIN is dedicated to providing quality services and quality products.

Light Gauge Steel Slitting Line Parameter

Model No.	RS0.2-1.8	RS0.3-3.0	RS0.8-4.0
Coil Material	CR Coils , HR Coils, S.S Steel Coils, GI Coils ,AL Coils, Copper Coils Picking Oil Coils
Coil Thickness	0.2～1.8mm	0.3～3.0mm	0.8～4.0mm
Line Speed	0～150/300m/min	0～150/300m/min	0-120/200m/min
Coil Weight	≤10T(15T)	≤20T(25T)	≤25T(30T)
Coil I.D	φ508mm	φ508mm	φ508,φ610,φ760mm
Coil O.D	≤φ1600mm	≤φ2000mm	≤φ2000mm
Strip Width	≥15mm	≥25mm	≥25mm
Number of Strip	5～15	8～20	5～15
Slitting Accuracy	±0.1mm	±0.15mm	±0.25mm
Blade shaft	Ф220mm	Ф240mm	Ф240mm
Electrical Control System	PLC Automatic control	PLC Automatic control	PLC Automatic control

Hot Products

Customized Color Steel Slitting Line Machine Roll Width 600-2500 Max Sheet Metal Industry

Contact Us

RISHBIN CO., LTD

Ф220mm Steel Coil Slitting Line , Aluminum Slitter Machine Hot Rolled Easy Operation

Product Details

Hot Products

Customized Color Steel Slitting Line Machine Roll Width 600-2500 Max Sheet Metal Industry

Medium Gauge Steel Sheet Slitting Machine Blade Shaft Ф300mm Knife Pivot Material 40Cr

High Speed Metal Slitter Machine VF Speed Adjusting Touch Screen For 5-20 Strips

±0.3mm Steel Slitting Equipment Strip Width ≥70mm Sheet Steel Slitting Machine

Automation Rolled Steel Rolled Slitting Line Galvanized Steel High Speed

Professional Steel Coil Slitting Line Time Saving Side Trimmers With Center Cut Shear