Metal Floor Decking Rolling Forming Machine For Russian

                              Metal floor decking rolling forming machine for Russian

Metal floor decking rolling forming machine for Russian is designed to make the metal decking sheets in batch fully automatically. Here we check the following drawing profile:

This metal decking profile we use 1500mm input coil width and the material thickness Max customer requirements is 1.5mm. As to the installation width is 840mm.

Wave height: 153mm

Wave width: 108mm

Wave distance: 172mm

Metal floor decking rolling forming machine for Russian

Here are the machine parameters for your reference:

The difficulty of this machine rolling forming:

1. The material thickness to 1.5mm, so we have to use 110mm shaft diameter.

2. The profile height to 153mm, that means the roller outside diameter to 300mm around, so super big machine.

3. The machine takes 48 roller stations to do the rolling forming.

4. The machine power to 22KW with 3 motors.

5. By those reason, this machine is not cheap and price is higher than others. And the machine weight maybe to 40 Ton.

6. As to the loading and installation, we will design it into two parts and then you can do the connection by bolt and nuts when you need machine working.

1. As to the profile is too big, in order to make the wave more straight, at the side wave we add more ribs. Or you can add some embossing pattern. For the shearing part, we use the 3 pieces cutting blades shearing to make sure the shape perfect good.

• Add a pair of gears to the first row of rollers (embossing rollers) to make the upper and lower rollers rotate at the same time, making it easier for the steel coil to enter the forming machine.
• Add clutch device is installed for the embossing roller, which can connect or cut off its driving force. It is easier to connect when feeding, and disconnect the power after the coil enter into roll former, so as to avoid the coil curve caused by the inconsistent speed between the embossing roller and other forming rollers.

• As to the decoiler part, you can choose to the manual one or hydraulic one. Normally for the heavy duty type, we use the 15 ton automatic hydraulic decoiler with the loading car.

For more information, please contact us at any time.