|
[China]
Trade Verify
Address: 20TH FLOOR,NO.1 NEW WORLD BUILDING ,NO.1018 MINAN ROAD,YINZHOU DISTRICT, NINGBO CITY, ZHEJIANG PROVINCE, CHINA
Contact name:Jikin Cai
Yuhong Group Co.,Ltd |
|
Verified Suppliers
|
|
|
ASTM A403 covers the standard for wrought austenitic stainless steel fittings for pressure piping applications. The material for fittings shall consist of forgings, bars, plates, or seamless or welded tubular products. Forging or shaping operations shall be performed by hammering, pressing, piercing, extruding, upsetting, rolling, bending, fusion welding, machining, or by a combination of two or more of these operations. All fittings shall undergo heat-treatment. Chemical and product analyses shall be performed and shall conform to the required chemical composition in carbon, manganese, phosphorus, sulfur, silicon, chromium, molybdenum, and titanium. Tension test shall be done on the fitting material to determine the tensile properties such as yield strength and tensile strength. Fittings supplied under this specification shall be examined visually for surface discontinuities, surface checks, and mechanical marks.
ASTM A403 WP316L covers the standard for wrought austenitic stainless steel
fittings for pressure piping applications. The material for
fittings shall consist of forgings, bars, plates, or seamless or
welded tubular products. Forging or shaping operations shall be
performed by hammering, pressing, piercing, extruding, upsetting,
rolling, bending, fusion welding, machining, or by a combination of
two or more of these operations. All fittings shall undergo
heat-treatment.
Chemical and product analyses shall be performed and shall conform to the required chemical composition in carbon, manganese, phosphorus, sulfur, silicon, chromium, molybdenum, and titanium. Tension test shall be done on the fitting material to determine the tensile properties such as yield strength and tensile strength. Fittings supplied under this specification shall be examined visually for surface discontinuities, surface checks, and mechanical marks.
| CR | Corrosion resistant grade. S through WU Classes do not apply. |
| WP-S | Seamless |
| WP-W | Welded, RT or UT all pipe starting material welds made with filler
metal. All fitting manufacturer welds except as excluded in A/SA403
paragraph 5.4.3. If UT is substituted for RT, all welds must be examined 100% for their length as required by A/SA403 paragraph 5.6 |
| WP-WX | RT all welds with or without filler metal. |
| WP-WU | UT all welds with or without filler metal. |
| WP grade-grade-class | Insert grades (304-304L) and class (S,W,WX, or WU). Applies to fittings meeting all chemical and physical requirements of both grades. |
C | Mn | Si | P | S | Ni | Cr | Mo |
|---|---|---|---|---|---|---|---|
0.035 | 2 | 1 | 0.04 | 0.03 | 10-16 | 18-20 | 2-3 |
Tensile Strength | Yield Strength | Elongation |
|---|---|---|
515 (Mpa) | 205 (Mpa) | 35 (%) |
Fittings are used wherever liquids, gases, chemicals and other fluids are created, processed, transported, or used.
Range of industries is very wide, as shown below:
Oil and gas industries, including upstream (exploration and production), midstream (transportation by ships, pipeline, rail, trucks; storage and wholesale) and downstream (refining into fuels or chemicals; marketing and distribution). Power plants using fossil or nuclear fuels. Geothermal energy for harnessing heat from the earth.
From basic ingredients to elaborate desserts. From milk, to juices and other beverages. Cold chain to keep produce fresh, drinks and frozen foods at a set temperature. Desalination plants to transform seawater into drinking water for arid areas and various tropical islands.
Medicines and vaccines that treat illnesses and help restore bodies and minds to their top conditions.
Microchips that go into all electronics, including smartphones, tablets, computers, television sets, telecom networks, etc.
Newsprint, glossy paper, cardboard boxes, books, writing paper, etc.
