|
[China]
Trade Verify
Address: 20TH FLOOR,NO.1 NEW WORLD BUILDING ,NO.1018 MINAN ROAD,YINZHOU DISTRICT, NINGBO CITY, ZHEJIANG PROVINCE, CHINA
Contact name:Jikin Cai
Yuhong Group Co.,Ltd |
|
Verified Suppliers
|
|
|
ASME SA213 T11 ALLOY STEEL SEAMLESS TUBE , BOILER AND HEAT EXCHANGE APPLICATION
Alloy steel tubes is a kind of steel alloyed tube with other
elements in amounts
of between 1 and 50% by weight to improve its mechanical
properties.Alloying
elements are added to achieve certain properties in the material.
As a guideline,
alloying elements are added in lower percentages (less than 5%) to
increase
strength or harden ability or in larger percentages (over 5%) to
achieve special
properties, such as corrosion resistance or extreme temperature
stability.
Available delivery conditions for SA213 Gr T11 Pipe include as-welded, stress relieved and normalized. In a very short span of time ,YUHONG GROUP being the industry leader in ASME SA213 Grade T11 Seamless Tube & ASTM A213 T11 Tube. We supply high quality laser ASTM A213 T11 Tubes for the downstream oil and gas marketplace.
SA213 Gr T11 Equivalent Material: P11
Material: T11, K11597, K11597 Seamless Tubes, Check below SA213 T11 Material Composition
| Trade Name | Grade | UNS # | Heater Tubes |
|---|---|---|---|
| 1 1/4 Chrome | T11 | K11597 | A213 / SA213 |
| MATERIAL | SPECIFICATION | |
|---|---|---|
| ASTM | ASME | |
| CHROME- MOLY ALLOY STEEL TUBE SEAMLESS | ASTM A213 T11 1-1/4% Chrome; ½% Moly | SA213 T11 1-1/4% Chrome; ½% Moly |
ASTM A213 /SA213 T11 Chemical Composition
| Grade | C≤ | Mn | P≤ | S≤ | Si≤ | Mo |
|---|---|---|---|---|---|---|
| SA213 T11 Composition | 0.05~0.15 | 0.30~0.60 | 0.025 | 0.025 | 0.50~1.0 | 0.44~0.65 |
| Grade | SA 213 T11 Tensile Strength, MPa | Yield Strength, MPa |
|---|---|---|
| T11 | 415 min | 205 min |
| SA 213 Gr T11 Density | Elongation, % | Hardness, HB |
| 7.85 g/cc | 30 min | 179 max |
| Mechanical Strength | Metric SA213-T11 Temperature |
|---|---|
| Rupture Strength | 28.0 - 47.0 MPa @ Temperature 575 °C, Time 3.60e+8 sec |
| 58.0 - 68.0 MPa @Temperature 550 °C, Time 3.60e+8 sec | |
| 84.0 - 92.0 MPa @Temperature 525 °C, Time 3.60e+8 sec | |
| 117 - 135 MPa @Temperature 500 °C, Time 3.60e+8 sec |
| Outside Diameter | OD Tolerance | WT Tolerance | Ovality Tolerance | Cut Length Tolerance |
|---|---|---|---|---|
| OD≤ 12, 7 mm | ± 0, 13 mm | ± 15 % | - | + 3, 18 mm, - 0 mm |
| 12, 7 mm < OD ≤ 38, 1 mm | ± 0, 13 mm | ± 10 % | max, 1, 65 mm | + 3, 18 mm, - 0 mm |
| 38, 1 mm < OD ≤ 88, 9 mm | ± 0, 25 mm | ± 10 % | max, 2, 41 mm | + 4, 76 mm, - 0 mm |
| Hot rolled ASTM A213/ ASME SA213 T11 Alloy Steel Tube | Outside Diameter, mm | Tolerance, % |
|---|---|---|
| OD≤101.6, WT≤2.4 | +40/-0 | |
| OD≤101.6, 2.4＜WT≤3.8 | +35/-0 | |
| OD≤101.6, 3.8＜WT≤4.6 | +33/-0 | |
| OD≤101.6, WT>4.6 | +28/-0 | |
| OD>101.6, 2.4＜WT≤3.8 | +35/-0 | |
| OD>101.6, 3.8＜WT≤4.6 | +33/-0 | |
| OD>101.6, WT>4.6 | +28/-0 | |
| Cold Drawn ASTM A213/ ASME SA213 T11 Alloy Steel Tube | Outside Diameter, mm | Tolerance, % |
| OD≤38.1 | +20/-0 | |
| OD>38.1 | +22/-0 |
Length: 5800mm; 6000mm; 6096mm; 11800mm; 12000mm; and so on.
Max length: 16000mm
Main Materials:
ASTM 213(Seamless Ferritic and Austenitic Alloy-Steel Boiler,
Superheater, and Heat-Exchanger Tubes)
ASTM A213 T5, T9, T11, T22, T23, T91, T92
ASTM A335 (Seamless Ferritic Alloy-Steel Pipe for High-Temperature
Service)
ASTM A335 P5, P9, P11, P22, P91, P92
ASTM A/ASME SA 213 specification pipes are available in grades
including T5, T9, T11, T22, T23, T91, T92. ASTM A/ASME SA335 Grade
P5, P9, P11, P22, P91, P92. Alloy steel tubes are generally
available in stock with OD sizes in all standard sizes and
thicknesses.On demand, we can offer our customers with high quality
alloy steel pipes and tubes with black painting, anti-corrosion oil
and galvanised finish.
| Trade Name | Grade | UNS # | Heater Tubes |
| 1 1/4 Chrome | T11 | K11597 | A213 / SA213 |
| 2 1/4 Chrome | T22 | K21590 | A213 / SA213 |
| 5 Chrome | T5 | K41545 | A213 / SA213 |
| 9 Chrome | T9 | K90941 | A213 / SA213 |
| T91 | T91 | K90901 | A213 / SA213 |
| T92 | T92 | K92460 | A213 / SA213 |
| Alloy Steel Boiler and Heat Exchanger Tubes | |||||||||
| ASTM | ASME | JIS G 3462 | BS | DIN | ISO | ABS | NK | LRS | DNV |
| A209 T1 | SA 209 T1 | STBA 12 | 3606 243 | 17175 | 2604 II TS26 | ABS K | KSTB 12 | Sec | |
| 15Mo3 | 4-E-TS380 | ||||||||
| A250 T1 | SA250 T1 | 3606 245 | 17177 | 2604 III TS26 | |||||
| 15Mo3 | |||||||||
| A209 T1a | SA 209 T1a | STBA 13 | ABS L | ||||||
| A250 T1a | SA250 T1a | ||||||||
| A213 T2 | SA213 T2 | STBA 20 | 17175 | 2604 II TS33 | Sec | ||||
| 14MoV83 | 4-E-TS440 | ||||||||
| A250 T2 | SA250 T2 | ||||||||
| A213 T12 | SA 209 T12 | STBA 22 | 3606 620 | 17175 | 2604 II TS32 | ABS O | KSTB 22 | Sec 6 | Sec |
| 13CrMo44 | 1Cr 1/2Mo-440 | 4-E-TS410-3 | |||||||
| A250 T12 | SA250 T12 | 2604 III TS32 | |||||||
| A213 T11 | SA199 T11 | STBA 23 | 3606 621 | ABS N | KSTB 23 | Sec | |||
| 4-E-TS410-4 | |||||||||
| SA 209 T11 | |||||||||
| A213 T22 | SA199 T22 | STBA 24 | 3606 622 | 17175 | 2604 II TS34 | ABS P | KSTB 24 | Sec 6 | Sec |
| 10CrMo910 | 2-1/2Cr 1Mo-410 | 4-E-TS450-2 | |||||||
| SA213 T22 | |||||||||
| A213 T5 | SA199 T5 | STBA 25 | 3606 625 | 2604 II S37 | Sec | ||||
| 4-E-TS430 | |||||||||
| SA213 T5 | |||||||||
| A213 T9 | SA199 T9 | STBA 26 | 3059-P2 622-490 | 2604 II S38 | Sec | ||||
| 4-E-TS500 | |||||||||
| SA213 T9 | |||||||||
| A209 T1b | SA 209 T1b | 3059-P2 243 | 17175 | 2604 II S39 | ABS M | Sec 6 | Sec | ||
| 17Mn4 | 2-1/2Cr 1Mo-490 | 4-E-TS450-1 | |||||||
| 3059-P2 620-460 | (A209- | ||||||||
| T1b) | |||||||||
| A250 T1b | SA250 T1b | 3059-P2 629-470 | 17175 | 2604 II S40 | Sec | ||||
| 14MoV63 | 4-E-TS460-2 | ||||||||
| A250 T11 | SA250 T11 | 3059-P2 629-590 | 17175 | Sec | |||||
| X20CrMoV12 1 | 4-E-TS590 | ||||||||
| A250 T22 | SA250 T22 | 3059-P2 762 | Sec | ||||||
| 4-E-TS610 | |||||||||
| A213 T5b | SA213 T5b | 3059-P2 304S51 | Sec | ||||||
| 4-E-TS690 | |||||||||
| A213 T5c | SA213 T5c | 3059-P2 306S51 | |||||||
| A213 T17 | SA 209 T17 | 3059-P2 316S52 | |||||||
| A213 T21 | SA213 T21 | 3059-P2 316S51 | |||||||
| A213 T23 | SA213 T23 | 3059-P2 321S51 | |||||||
| A213 T91 | SA213 T91 | 3059-P2 347S51 | |||||||
| A213 T92 | SA213 T92 | 3059-P2 215S15 | |||||||
Type:Seamless
Form:Round Pipes/Tubes, Square Pipes/Tubes, Coiled Tubes,Pan Cake
Coils, Hydraulic Tubes
Length:Single Random, Double Random & Required Length
End:Plain End, Beveled End, Treaded
End Protection:Plastic Caps
Outside Coating:Black Painting, Anti-Corrosion Oil, Galvanized
Finish, Finish as per customer Requirements
Inspection, Test Reports:Mill Test Certificates, EN 10204 3.1,
Chemical Reports, Mechanical Reports, PMI Test Reports, Visual
Inspection Reports, Third Party Inspection Reports, NABL Approved
Lab Reports, Destructive Test Report, Non Destructive Test Reports.
