Yuhong Group Co.,Ltd |
Verified Suppliers
|
|
Overview:
WP304L is a type of stainless steel material used in piping
fittings. A cap is a type of fitting that is used to cover the end
of a pipe.
A WP304L cap is a pipe fitting made from WP304L stainless steel
material. It is designed to fit over the end of a pipe and provide
a seal, preventing fluid or gas from escaping. WP304L is a
low-carbon variant of the popular 304 stainless steel. This
material is often used in applications that require corrosion
resistance, such as in the chemical, petrochemical, and food
processing industries.
The WP304L cap is designed to be welded onto the end of a pipe. It
is available in various sizes and shapes to fit different pipe
diameters and end configurations. The cap is usually fitted with a
socket weld, butt weld, or threaded connection, depending on the
application requirements.
Specification:
Standard | ASTM A403/ASME SA403; EN10253-4 |
Material | WP304L; 1.4307 |
Type | Buttweld Cap |
Connection | Welding |
Size | 1/2"-48"(DN15-DN1200) or custom size |
Thickness | SCH10S-XXS(2-60mm) |
Surface | Sand Blasting |
Packing | Plywood case/Pallet |
Chemical Composition:
Grade | C | Mn | P | S | Si | Ni | Cr |
WP304L | 0.03 max | 2.0 max | 0.045 max | 0.03 max | 1.00 max | 8.0-12.0 | 18.0-20.0 |
Mechanical Properties:
Grade | Yield Strength, min, ksi [MPa] | Tensile Strength, min, ksi [MPa] | Elongation % |
WP304L | 25(170) | 70(485) | 28 |
Dimension for BW Cap:
Nominal Size | Out Diameter at Bevel (mm) | Length (mm) | Limiting Wall Thickness for Length E (mm) | ||
DN | NPS | O.D. | E | E1 | |
15 | 1/2 | 21.3 | 25 | 25 | 4.57 |
20 | 3/4 | 26.7 | 25 | 25 | 3.81 |
25 | 1 | 33.4 | 38 | 38 | 4.57 |
32 | 1 1/4 | 42.2 | 38 | 38 | 4.83 |
40 | 1 1/2 | 48.3 | 38 | 38 | 5.08 |
50 | 2 | 60.3 | 38 | 44 | 5.59 |
65 | 2 1/2 | 73.0 | 38 | 51 | 7.11 |
80 | 3 | 88.9 | 51 | 64 | 7.62 |
90 | 3 1/2 | 101.6 | 64 | 76 | 8.13 |
100 | 4 | 114.3 | 64 | 76 | 8.64 |
125 | 5 | 141.3 | 76 | 89 | 9.65 |
150 | 6 | 168.3 | 89 | 102 | 10.92 |
200 | 8 | 219.1 | 102 | 127 | 12.7 |
250 | 10 | 273.0 | 127 | 152 | 12.7 |
300 | 12 | 323.8 | 152 | 178 | 12.7 |
350 | 14 | 355.6 | 165 | 191 | 12.7 |
400 | 16 | 406.4 | 178 | 203 | 12.7 |
450 | 18 | 457.0 | 203 | 229 | 12.7 |
500 | 20 | 508.0 | 229 | 254 | 12.7 |
550 | 22 | 559.0 | 254 | 254 | 12.7 |
600 | 24 | 610.0 | 267 | 305 | 12.7 |
650 | 26 | 660.0 | 267 | ... | ... |
700 | 28 | 711.0 | 267 | ... | ... |
750 | 30 | 762.0 | 267 | ... | ... |
800 | 32 | 813.0 | 267 | ... | ... |
850 | 34 | 864.0 | 267 | ... | ... |
900 | 36 | 914.0 | 267 | ... | ... |
950 | 38 | 965.0 | 305 | ... | ... |
1000 | 40 | 1016.0 | 305 | ... | ... |
1050 | 42 | 1067.0 | 305 | ... | ... |
1100 | 44 | 1118.0 | 343 | ... | ... |
1150 | 46 | 1168.0 | 343 | ... | ... |
1200 | 48 | 1219.0 | 343 | ... | ... |
GENERAL NOTE: The shape of these caps shall be ellipsoidal and
shall conform to the requirements given in the ASME Boiler and
Pressure Vessel Code. NOTES: (1) Length E applies for thickness not exceeding that given in column “Limiting Wall Thickness for Length, E.” (2) Length E1 applies for thickness greater than that given in column “Limiting Wall Thickness for Length, E” for NPS 24 and smaller. For NPS 26 and larger, length E1 shall be by agreement between the manufacturer and purchaser. |
Application:
1. Food processing industry: The use of stainless steel fittings
like WP304L Cap is essential to meet hygiene standards in the food
processing industry. These caps are used to seal pipes and prevent
the accumulation of bacteria in the pipes.
2. Chemical processing plants: WP304L Cap is also used in chemical
processing plants to protect the end of pipes from corrosion caused
by chemicals and to prevent leaks.
3. Pharmaceutical industry: The use of WP304L Cap helps to maintain
purity and sterility during the manufacturing of pharmaceutical
products.
4.Oil and gas industry: WP304L Cap is used in pipelines that
transport oil and gas to prevent corrosion and leakage.