|
[China]
Trade Verify
Address: 20TH FLOOR,NO.1 NEW WORLD BUILDING ,NO.1018 MINAN ROAD,YINZHOU DISTRICT, NINGBO CITY, ZHEJIANG PROVINCE, CHINA
Contact name:Jikin Cai
Yuhong Group Co.,Ltd |
|
Verified Suppliers
|
|
|
ASTM B366 UNS N04400, Monel 400 Butt Weld Nickel Alloy Steel Pipe Fittings
Monel 400 is a high performance, high strength alloy of nickel and copper (with trace amounts of iron, manganese, carbon, and silicon content). It exhibits excellent resistance to acids and alkalis, good ductility, and good thermal conductivity, and can be hardened only by cold-working.
ASTM B366 UNS N04400 / Monel 400 Nickel Alloy Buttweld Fittings are resistant to caustic solvents, acids and alkaline, as well as seawater, has high robustness at high temperatures, and are wieldable too, used in many marine engineering applications. Monel 400 pipe fittings are an excellent choice for applications that require superior resistance to corrosion and erosion.
| Grade | Monel 400 / UNS N04400 |
| size | Seamless Butt Weld Fittings: 1/2" - 10" Welded Butt Weld Fittings: 1/2" - 48" |
| Type | DN15-DN1200 |
| Connection | Welding |
| Form | 90 Elbow, 45 Elbow, Long Radius Elbow, Short Radius Elbow, Concentric Reducer, Eccentric Reducer, Equal Tee, Unequal Tee, Lateral Tee, Cross, Bends 1.5D, 3D, 5D, 10D, U bend, 180 Deg Bend, Short Stub End, Long stub end, End Cap, Dish Cap |
| Dimensions | ASME/ANSI B16.9, ASME B16.28, MSS-SP-43, BS4504, BS4504, BS1560, BS10 |
| Thickness | SCH10, SCH20, SCH30, STD SCH40, SCH60, XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XXS |
| Bending Radius | R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom |
| Manufacturing process | Push, Press, Forge, Cast, etc. |
Equivalent Grades:
| STANDARD | UNS | WERKSTOFF NR. | AFNOR | EN | JIS | BS | GOST |
| Monel 400 | N04400 | 2.4360 | NU-30M | NiCu30Fe | NW 4400 | NA 13 | МНЖМц 28-2,5-1,5 |
Product Features:
Corrosion resistant
Sustain high pressure & temperature load
Rust proof finish
Excellent stress distribution
Chemical Composition:
| Ni | 63 min |
| C | 0.3 max |
| Al | 0.5 max |
| Mn | 2 max |
| Si | 0.5 max |
| Fe | 1 – 2.5 |
| Cu | 28 – 34. |
| S | 0.02 max |
Mechanical Properties:
| Density | Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
| 8.8 g/cm3 | 1350 °C (2460 °F) | Psi – 35,000 , MPa – 240 | Psi – 80,000 , MPa – 550 | 40 % |
Applications:
Condensers
Heat Exchangers
Pharmaceuticals
Sea Water Equipments
Pulp and Paper Industries
Power Generation
Gas Processing Plants
Chemical & Petrochemicals Equipments
