Yuhong Group Co.,Ltd |
Verified Suppliers
|
|
ASTM B163 Incoloy 825 + Aluminum Extruded Fin Tube for oil and gas cooling application
Yuhong Group supply variety of extruded fin tubes in the industry.
All of our products are domestically sourced, developed, and
produced, which means our customers have immediate access to
exactly the products they need for their particular application.
And you are assured of the highest quality and manufacturing
standards and a local, concerned, customer service presence.
The strong connection between fin and base tube prevents loosening
of fin because of heat stress, oxidization, corrosion etc., use at
very high temperatures possible. This extruded finned tubes
configuration can be used in practically any heat transfer
applications, and particularly suited for high temperature, high
pressure applications. The important features of this configuration
are efficient, effective bond of fin to tube under any conditions
of temperature and pressure, and ability to withstand high fin-side
temperatures.
These tubes are used with a wide range of material such as carbon
steel, low alloys steel and stainless steel for corrosive flue gas
or high temperatures.
Tube/Pipe Size 5/8.00″ to 2″ OD
Fin Height 10 mm to 50.8mm
Fin Thickness 0.3mm ~ 0.6 mm
Fin Pitch 1 to 20 fins per inch
Materials Carbon Steel ,Alloy Steel ,Stainless Steel and
Corrosion-resistance Steel.
Application Heat Transfer Equipment including Heat Exchangers,
Boilers, Economizers, Super Heaters, Fired Heaters, HRSG, Waste
Heat Recovery Systems etc.
1. MAXIMUM WORKING TEMPERATURE 285°C |
2. ATMOSPHERIC CORROSION RESISTANCE HIGH |
3.MECHANICAL RESISTANCE RESISTANC HIGH |
4.FIN MATERIALS ALUMINIUM, COPPER |
5. BASE TUBE MATERIALS Stainless Steel, Carbon Steel, Alloy Steel, Titanium, Copper, Duplex Stainless Steel, Inconel etc. (all material in the theoretical limit)l |
Extruded finned tubes application: | ||
1.Operating temperatures less than 300°C; | ||
2.Offshore or other remote applications; | ||
3. Heat pipes; | ||
4. Dry air coolers for air, gas or oil; | ||
5. Air to air heat exchangers for HVAC applications; | ||
6. Air dehumidification in air treatment plants and | ||
7. Eenergy recovery in air exhaust system. |