|
[China]
Trade Verify
Address: 20TH FLOOR,NO.1 NEW WORLD BUILDING ,NO.1018 MINAN ROAD,YINZHOU DISTRICT, NINGBO CITY, ZHEJIANG PROVINCE, CHINA
Contact name:Jikin Cai
Yuhong Group Co.,Ltd |
|
Verified Suppliers
|
|
|
Butt Weld Fittings SB366 Inconel 600, Inconel 601, Inconel 625, Inconel 690, Inconel 718 Elbow,Tee, Reduce, Cap
Inconel 601 is a nickel-chromium alloy, that is highly resistant to
oxidation through 2200°F. 601 alloy develops a tightly adherent
oxide scale which resists spalling even under severe thermal
cycling. The alloy has good high temperature strength, and retains
its ductility after long service exposure. 601 alloy has good hot
corrosion resistance under oxidizing conditions. 601 alloy is not
suggested for use in strongly reducing, sulfur bearing
environments.
For maximum oxidation resistance, 601 alloy should be welded with
matching composition 601 alloy GTAW wire. The weld fillers
developed for RA 602 CA can also provide a weld which is stronger
and more oxidation resistant than the 601 alloy base metal. 601
alloy is more difficult to machine than 304 stainless steel. Its
machinability rating is 15-21% relative to AISI B1112 steel.
Chemistry
| Ni | Cr | Al | C | Mn | Cu | Si | S | Fe | |
| MIN | 58.00 | 21.00 | 1.00 | -- | -- | -- | -- | -- | -- |
| MAX | 63.00 | 25.00 | 1.70 | 0.10 | 1.00 | 1.00 | 0.50 | 0.015 | Balance |
*ASTM specification 0.20 max C.
Specifications
AMS 5715, AMS 5870
ASME SB 167, ASME SB 168
ASTM B 167, ASTM B 168
EN 2.4851
UNS N06601
Werkstoff 2.4851
Inventory
601 Coil, 601 Pipe, 601 Plate, 601 Sheet
Common Trade Names
Alloy 601, Inconel® 601, Nickel 601
Features
· Outstanding oxidation resistance to 2200°F
· Highly resistant to carburization
· Good creep and rupture strength
· Metallurgical stability
Applications
· Copper brazing, annealing and sintering muffles and retorts
· Radiant tubes
· Strand annealing tubes
· Steam superheater tube supports
· Rotary kilns and calciners
· Thermocouple protection tubes
Physical Properties
Density: 0.293 lb/in3
Melting Point: 2375 - 2495°F
| Temperature, °F | 70 | 1000 | 1200 | 1400 | 1600 | 1800 | 2000 |
| Coefficient* of Thermal Expansion, in/in°F x 10-6 | - | 8.5 | 8.9 | 9.2 | 9.5 | 9.8 | 10.2 |
| Thermal Conductivity Btu • ft/ft2 • hr • °F | 6.5 | 11.6 | 12.7 | 13.7 | 14.8 | 15.8 | 16.9 |
| Modulus of Elasticity, Dynamic psi x 106 | 29.95 | 25.43 | 24.12 | 22.48 | 20.54 | 18.43 | 16.20 |
* 70°F to indicated temperature.
Mechanical Properties
Short-Time Elevated Temperature Tensile Properties
| Temperature,°F | 70 | 1000 | 1200 | 1400 | 1600 |
| Ultimate Tensile Strength, ksi | 100 | 90 | 60 | 34 | 18 |
| 0.2% Yield Strength, ksi | 54 | 48 | 41 | 26 | 15 |
| Elongation, % | 45 | 44 | 45 | 70 | 120 |
Typical Creep - Rupture Properties
| Temperature, °F | 1400 | 1600 | 1800 | 2000 |
| Minimum Creep 0.0001%/Hour, ksi | 4.1 | 2.0 | 0.76 | 0.43 |
| 10,000 Hour Rupture Strength, ksi | 6.2 | 2.6 | 1.2 | 0.62* |
| Grade | UNS | W.Nr. | Trade Name |
| Inconel 600 | N06600 | 2.4816 | Inconel 600®, Nickelvac® 600, Ferrochronin® 600 |
| Inconel 601 | N06601 | 2.4851 | Inconel 601®, Pyromet® 601, Nicrofer® 601 |
| Inconel 617® | N06617 | 2.4663 | Inconel 617®, Nicrofer® 617 |
| Inconel 625 | N06625 | 2.4856 | Inconel 625®, Chornin® 625, Altemp® 625, Nickelvac® 625, Haynes® 625 Nicrofer® 6020 |
| Inconel | N07718 | 2.4668 | Inconel 718®, Nicrofer® 5219, Alvac® 718, Haynes® 718, Altemp® 718 |
| Inconel X 750 | N07750 | 2.4669 | Inconel X750®, Haynes X750®, Pyromet® X750, Nickelvac®X750, Nicorros® 7016 |
| Incoloy 800 | N08800 | 1.4876 | Incoloy 800®, Ferrochronin® 800, Nickelvac® 800, Nicrofer® 3220 |
| Incoloy 800H | N08810 | 1.4876 | Incoloy 800H®, Ferrochronin® 800, Nickelvac® 800, Nicrofer® 3220 |
| Incoloy 800HT | N08811 | 1.4876 | Incoloy 800HT®, Ferrochronin® 800, Nickelvac® 800, Nicrofer® 3220 |
| Incoloy 825 | N08825 | 2.4858 | Incoloy 825®, Nickelvac® 825, Nicrofer 4241® |
Types:Elbow - 90 Deg. & 45 Deg., Tee - Equal & Reducing, Union, Cross, Coupling - Full & Half, Socket Reducing, CAP, Plug-Hex & Square, Nipples (Hex/Reducing), Bushing, Sockolet, Weldolet, Thredolet, Elbolet, Nipolet.
