Sussman Machinery(Wuxi) Co.,Ltd |
Verified Suppliers
|
|
PLC Control Fully Automatically Slotted Strut Channel Roll Forming Machine With Gear Box
Strut channel roll forming machine is also called like seismic
support roll forming machine or seismic channel roll forming
machine, its product is used to mount, brace, support, and connect
lightweight structural loads in building construction. Our strut
channel roll forming machine is suitable to produce strut channels
with 12 gauge(2.6mm) or 14 gauge(1.9mm) thick sheet metal (normally
range 2-2.5mm), raw material could be Hot-rolled and cold rolled
steel, Hot-dip galvanized sheet, Pre-Galvanized Steel,
Mill(Plain/Black) Steel, Aluminum, Stainless Steel etc. And
according to slot type, our machine could produce solid channel,
slotted channel, half slotted channel, long slotted channel,
punched channel, punched and slotted channel etc.
Our roll forming machine could produce 3-5 sizes(eg: 41x27, 41x41,
41x62) in one machine, the working speed can reach 20m/min, if you
want a higher speed like 40m/min, we give you a solution with
rotary punch system, which punch speed is up to 50m/min.
Detail Images
7 rolls leveling, 3 rolls up and 4 rolls down
Diameter is Ø 80mm, chrome and HRC60 heat treatment to secure the
smooth surface
Leveling Raw Material thickness:1.5-3.0mm
Max Leveling Raw Material width: 400mm
It can control the punching distance in precision, controlled by PLC, and the feeding tolerance can be+-0.05mm, the servo motor can control the speed, and can accept the input signal, and react quickly, and performance well, the touch
screen can display the rotating speed, the length and the quantity, it can be controlled by the manual and auto modes.
Series JH21-63
◆ Welded body with steel plate and high intensity.
◆ Main motor is made by Siemens.
◆ Adopts combined pneumatic friction clutch and brake.
◆ Six-face rectangle lengthen guide; JH21-315B/400B adopts
eight-face lengthen guideway.
◆ Balancing cylinder adopts manual lubrication system.
Suitable Plate Material: thickness 2mm, Galvanized steel
Working Speed: 0-15meters /min adjustable
Forming Steps: about 16 stations
Material of Roller: Cr12mov, Quench HRC58-62 Plated Chrome
Material of Shaft: 45# Advanced Steel (Diameter: 90mm), thermal
refining
Driven system: Gearbox driven
Main Power with reducer: 15KW WH Chinese Famous
Power supplier: 380V, 60 Hz, 3Phases
PLC--Siemens, Japan English and Chinese Language
Touch Screen—Delta
Encoder--Omron, Japan
Electric parts--Schneider
Length: 3 meters
Number: 2 units
Profile drawing
Machine photo