|
[China]
Trade Verify
Address: NO.18-1, Funan road,Wenlin, Zhutang Town, Jiangyin city, Jiangsu province, China.
Contact name:Spring Wu
Sussman Machinery(Wuxi) Co.,Ltd |
|
Verified Suppliers
|
|
|
Fully Automatic Galvanized Vigacero Deck Floor Roll Forming Machine Ceiling Rail Making Machine
1.This machine is made up of roll forming machine,hydraulic decoiler with car,cutting machine,PLC computer control and hydraulic system,out put tables.
2.The machine is stable,no noise,no shake.
3.It is one unit, the control box and the hydraulic station for the
cutting are all put under the machine frame to save space.
4.The touch screen is hang over, it is not under the floor.
5.When you get the machine,it is no need to assemble and connect the complicate cable of the machine, you only need to connect one main cable, then the machine is working.
Technical Parameter
| Items | Specifications | |
| Material of coil | Material Thickness | 1.5mm galvanized |
| Un Coiler | 8 tons hydraulic | |
| Forming system | Rolling Speed | 25 m/min |
| Roller Stations | About 31 stations | |
| Roller Material | 45# Steel with quenching 60mm shaft
| |
| Maim Motor Power | 15* kw | |
| Hydraulic cutting Power | 4 kw | |
Cutting system | Material Of Cutting | CR12 with quench treatment |
| Hardness | HRC58-62 | |
| Tolerance | +-1.5mm | |
| Electrical control system | Electric Source | 380V, 60HZ,3 phase Also can satisfy Customer’s require |
| Control System | PLC Siemens as list in the note | |
| Weight | About 10 tons | |
| Way Of Drive | Gear box driven | |
| Size of machine | Length15000mm*Width700mm* Height 1000mm |
Main Components
| 8 ton hydraulic de-coiler with coil car | 1 set |
| Main roll forming machine | 1 set |
| PLC Control box | 2 units |
| Hydraulic station | 1 unit |
| Servo following cutting | 1 unit |
| Out table | 1 unit |
Working Flow
De-coiler—→Level device —→Main roll forming
machine—→Hydraulic cutting—→ Run out table
Profile Drawing
