0.5mm-1.2mm Adjustable Shelf Back Box Panel Roll Forming Machine Storage Rack Board

0.5mm-1.2mm Thickness Adjustable Shelf Back Box Panel Roll Forming Machine Storage Rack Shelf Board Roll Forming Machine

Warehouse shelf upright system roll forming machine is widely used to produce upright post, shelf panel, back panel/ board, box beam and step beam machine, beam welding machine.

The machine can do thickness is from 0.7-1.2mm with raw material Cold-rolled Steel, Galvanized Coil, Carbon steel.

The shelf box machine is together with the top hat machine to make the shelf box for the supermarket shelf. Sussman Shelf box machine is included the de-coiler, the hydraulic punching device, the main roll forming machine, and the hydraulic cutting device.

The shelf box machine can make width from 100-600mm, also can do 200-900mm. It is the good choice for the supermarket shelf business.

Our produced profile meet ISO, CE, UL standards, and our machine is applied to Warehouse supermarket ,industry or home.

We have experience of exporting our pallet racking system roll forming machine to Mexico, Bangladesh, Costa Rica, Russia,Dominica, etc.

Technical Data:

1. Materials to form: According to the customers’ requirement width 200-610mm, adjustable by PLC automatically, thickness 0.5-1.2mm, length is variable from 0-600mm

2. Forming steps: About 18 steps

3. Material of rollers:GCr15 steel, precision-machined, high frequency quenching HRC58-62, diameter of rollers: ＞￠150

4. Material of main shaft : 45# high quality steel (diameter＞￠50)

5. Chains’ material: 45# steel, high frequency quenching, circular pitch: 38.1; number of teeth: 13

6. Cutting: Hydraulic cutting; quenching HRC58-62

7. Electronic control: PLC control

8. Dimension of machine: 10000mmX1000mmX900mm

10. Drive system: Chain drive, 11KW main motor power, working speed: 3-5m/min;

11. Welding structure: material of fixed beam and walking beam: hot-rolled steel, the base and rack are be gantry planer processing after welded, work platform is not allowed stress deformation; main machine table-board’s plainness ＜2mm/1000mm

12. Parts: Slide: imported from Japan; bearing: Zhonghang Brand of Harbin

13. Punching: Punching the holes at the press machine before forming the shapes

14. Bending: Bending after the hydraulic cutting

 

Machine List:

name	quantity (set)
5 ton electrical De-coiler	1 set
Servo feeder	1 set
Hydraulic punching device	1 set
Hydraulic cutting&bending machine	1 set
Main roll forming machine	1 set
Run out table	2 sets
Control box	2 sets

Working Flow:

De-coiler—→Level device —→Servo feeding—→ Hydraulic punching notch—→Punching press —→Main roll forming machine—→Hydraulic cutting—→Bending—→ Run out table

 

Profile Drawing:

 

 

Sample pictures: