|
[China]
Trade Verify
Address: NO.18-1, Funan road,Wenlin, Zhutang Town, Jiangyin city, Jiangsu province, China.
Contact name:Spring Wu
Sussman Machinery(Wuxi) Co.,Ltd |
|
Verified Suppliers
|
|
|
1250mm Material Width Stainless Galvanized Metal Steel Waterstop Plate Sheet Embossing Machine
Main Feather
Metal Checker plate sheet Water ripples embossing machine is to produce the Water ripples embossing plate,the water ripple plate is mainly used for decoration.
The metal sheet emsbossing machine can help you emboss different
pattens on the metal which could be used for many building, such
as: wall, panel or others. The alloy embossing roller for steel
sheet embossing rollers fuctions main by the two big rollers, there
are patterens on the rollers, so when then rollers rolling, and the
sheet between the two sheet is running, there will appear the
patterns on the sheet.Finest-quality Steel Embossing roller floor
embossing machinery can work manual by workers from the feeding and
the embossing, and also be formed by the full automatic by PLC
controling box.
Working flow
Roller table → guiding and correcting facility → embossing machine → leveling machine→ out table
| Product Name | Embossing steel sheet roll forming machine |
| Material Specification | Colored steel sheet |
| Thickness | 0.3-0.8 mm |
| Max. Coil Width | 1250mm |
| Working Speed | 10-15m/min |
| Run Direction | Both directions |
| Power Requirement | Main motor power:4kw |
| Machine Dimension | About 1700mm*1300mm*1500mm |
| Total Weight | About 4000kgst |
| Voltage | 380v/3phase/50HZ or as customer's requirement |
| Roller Material | Cr12 |
| Width of Roller | 1000 or 1300mm |
| Embossing Pattern | As per the samples or the customer’s requirement |
Machine Pictures
Application
After-sale Serive
- The seller take responsibility to installation and
commissioning of the equipment and free training. After machine
arrive the destination, by the request of the buyer , the seller
will provide 1 technical engineer to guide installation and
training , and the buyer should give the technical person with full
cooperated.
- Installation period: about 5 days after the complete
preparation by the buyer such as the foundation and all necessary
accessories.
- Training time: 5 days.
- Before departure of the engineers from seller, the
buyer should pay for installation and commissioning fee 100$/day to
the point account of the seller. The two-way ticket,visa, food,
hotel , the translator and insurance are all should provide by
buyer with full responsibility.
-The seller supply technical data (including forming
mould drawing, electrical elements drawing and equipment drawing
etc.)
