|
[China]
Trade Verify
Address: NO.18-1, Funan road,Wenlin, Zhutang Town, Jiangyin city, Jiangsu province, China.
Contact name:Spring Wu
Sussman Machinery(Wuxi) Co.,Ltd |
|
Verified Suppliers
|
|
|
PU sandwich panel production line
Technical Parameter
1.1 Roll Forming Machine
a) Motow power: up panel 4Kw, down panel 7.5Kw
b) roll forming speed: 5-8m/min
c) roller material: 40Cr, surface chrome coated, thickness 0.4mm--0.8mm
d) The way of width adjust: straight track, silk pole, reducer motor adjustable
e) width adjustable range: 600-1250mm
f) sheet thickness: 0.4-0.8mm
g) structrue: arm type adjustable, support roller in the middle
h) shaft diameter: 50mm
1.2 Uncoiler
a) motor power: 3Kw
b) hydraulic power: 2.2Kw
c) raw material: color steel sheet, aluminum sheet
d) innder diameter of coil: 500mm- 600mm
d) outer diameter of coil: 1200mm
e) coil weight: 10T
f) sheet thickness: 0.4-0.8mm
g) sheet width: 1250mm
f) uncoil speed: 1.5-12m/min
g) hydraulic pressure: 6.3Mpa
1.3 Coil Car
a) hydraulic cylinder lift stroke: up panel 0.5m, down panel 0.5m
b) coil car stroke: 2.5m
c) pressure of hydraulic system: 6.3Mpa
1.4 Two sets of steel sheet transverse cutting machines
a) hydraulic
b) cut steel sheet according to certain length
c) two sets of PVC film covering device wich applies the PVC film onto the steel sheet
1.5 Pre-heating Room
a) temperature sensor: hot couple
b) temperature adjustment: automatic control by temperature control equipment
c) hot air motor: 18.5Kw
d) hot air heater: 200Kw
e) heat type: heated by electricity and air circulate
1.6 Double belt machine
a) effective working length: 24m
b) length & width of double belt: 1400mm x 267mm
c) double belt material: alloy steel
d) double belt thickness: 14mm
e) speed: 3-10m
1.7 Band Saw Cutting Machine
a) outline dimension of band saw cutting machine: 5500mmx5000mmx 3000mm
b) run speed of band saw: 1000-1500rpm
c) rotate diameter of band saw: 550mm
d) cutting speed of band saw: 50m/min-1000m/min
e) width of band saw: 30mm
f) length of band saw: 3000mm-4000mm
g) transverse move distance: 1500mm
h) cut length on line: 3000mm
Main Components
No. | Machine Name |
|
1. | Un-coiler 10 TONS | 2 Sets |
2. | Steel sheet transverse cutting machine, steel sheet surface PVC film covering device | 2 Sets |
3. | Roll forming machine for wall and roof panel | 4 sets |
4. | Panel pre-heat equipment | 1 set |
5. | PU/PIR 2 component Liquid mixing and injecting section for foaming with high pressure (with Singapore brand) | 1 set |
6. | 24m double belt machine include Hydraulic pressure control system with 4 sets side nylon seal blocks to make different thickness of wall panel and roof panel | 1 set |
7. | Heating and heat insulation system | 1 set |
8. | Automatic Panel Bandsaw Cutting Machine | 1 set |
9. | Automatic Vacuum stacking machine and wrapping machine | 2 sets |
10. | Cooling conveyer | 1 set |
11. | Cowper stove 0.5 ton | 1 set |
12. | Air compressor and tank 2 m3 | 1 set |
13. | PU Foaming machines (Singapore Brand) | 1 set |
Profiles of PU Sandwich Panel
Photo Gallery
Loading picture
After-sale Serive
- The seller take responsibility to installation and
commissioning of the equipment and free training. After machine
arrive the destination, by the request of the buyer , the seller
will provide 1 technical engineer to guide installation and
training , and the buyer should give the technical person with full
cooperated.
- Installation period: about 5 days after the complete
preparation by the buyer such as the foundation and all necessary
accessories.
- Training time: 5 days.
- Before departure of the engineers from seller, the
buyer should pay for installation and commissioning fee 100$/day to
the point account of the seller. The two-way ticket,visa, food,
hotel , the translator and insurance are all should provide by
buyer with full responsibility.
-The seller supply technical data (including forming
mould drawing, electrical elements drawing and equipment drawing
etc.)
