|
[China]
Trade Verify
Address: NO.18-1, Funan road,Wenlin, Zhutang Town, Jiangyin city, Jiangsu province, China.
Contact name:Spring Wu
Sussman Machinery(Wuxi) Co.,Ltd |
|
Verified Suppliers
|
|
|
16 stations CZ Purlin Roll Forming Machine , 380V, 50Hz, 3Phase
Cr40 Steel
The advantages of CZ purlin machine AUTOMATIC size-change type are
as follows:
1.Produce different purlin size without changing rollers or
spacers.
2.No need changing cutter for different size.
3.Easy operation, low maintenance cost
4.Infinite sizing(any size within machine range),help to save
material
5.Optional Punch hole at any position of purlin web side and flange
side
| Material | ||
| Material Thickness(&):1.5 - 3.0mm | ||
| Applicable material:Galvanized Steel Coils, Hot Rolled Coils,Cold Rolled Coils,yield strength 245Mpa or 550Mpa | ||
| Machine Components | ||
| 1)Manual Decoiler: one set | ||
| Max. feeding width: 500mm, coil ID range 470mm±30mm | ||
| Capacity: Max. 3Ton |  | |
| 2) Cold Rolling Mills: | ||
| With feeding material guide, body frame made from 500# type steel by welding; | ||
| Side wall thcikness: 30mm | ||
Rollers manufactured from bearing steel GCr15,precision
machined,hard |  | |
| Shafts manufactured from 45#,Main Shaft Diameter=φ90mm,precision machined | ||
Motor Driving,Gear chain transmission, 19 forming stations and 7
rollers(3 upper rollers and 4 | ||
| Main Motor=18.5KW , Frequency speed control | ||
| Forming speed approx.15-20m/min | ||
| 3)Hydraulic Cutting device | ||
| Pre-punching & Pre-cutting, stop to punching, stop to cutting, use the same hydraulic motor drive | ||
| hydraulic motor: 7.5KW, Hydraulic pressure range: 0-12Mpa | ||
| Cutting tool material: Cr12, Heat treatment | ||
| 4)PLC Control System(Touch screen brand:Taiwan WEINVIEW,Inverter brand:Finland VOCAN/Denmark Danfoss ,Encoder brand: Japan Koyo) | ||
| Just input the required model/size on the touch screen ,it can Auto-changing the Purlin Z size in 60seconds(No need to change | ||
| rollers or spacers or cutters like traditional old style machine which takes over 45minutes for each production size changing). | ||
| Control the quantity and punching,cutting length automatically | ||
| Combined with: PLC, Inverter, Touch Screen, Encoder, etc | ||
| Cut-to-length tolerance≤±1mm | ||
| Control Voltage 24V | ||
| 5) Exit Rack Un-powered, two units | ||
 | ||
Working Flow of Roll Forming Machine
feedingwithguide—Rollforming——Cutting—Products collecting
Standard Profile Drawing of product 
Photo
Loading pictures
* Inquiry and consulting support.
* Profile drawing and roll forming solution.
* View our Factory.
* Training how to instal the machine, training how to use the
machine.
* Engineers available to service machinery overseas.
