|
[China]
Trade Verify
Address: NO.18-1, Funan road,Wenlin, Zhutang Town, Jiangyin city, Jiangsu province, China.
Contact name:Spring Wu
Sussman Machinery(Wuxi) Co.,Ltd |
|
Verified Suppliers
|
|
|
Technical Parameter
Polyurethane energy-saving fire protection continuous sandwich panel production line is the equipment mainly produce pu foam sheet. It can produce all kinds of polyurethane flame-retardant panel with the surface of aluminum sheet, color steel, non-woven, kraft paper or aluminum foil. At the same time, after extended function, it could also produce sandwich panel for steel structure. The material thickness, width are according to customer‘s requirements. And the widest can be 1200mm, the length can be discussed. The products are mainly used in building exterior insulation, central air conditioning blower duct, steel structure wall panels and roof panels.
1.working principle
The polyurethane resin raw material, curing agent, foaming agent are at a specific ratio by the metering pump of the perfusion machine transported to high speed mix head. When uniformly mixed, the fabric head will have a reciprocating movement, continuously coating on the upper and down layers of the surface material. After that, the surface material will go into a twin-belt machine, and the machine will heat the two layer to foaming and curing molding; when the sandwich panel are foaming and curing molding, the trimming device on both sides of the production line will obtain accurate width dimensions. Finally, by the length tracking cutting and sawing machine, cutting off the settled length
2.Equipment component
Polyurethane sandwich panel continuous production line are mainly
composed of uncoiler, coil forming machine, preheating roller
channel, foam machine, fabric machine, double belt machine, length
cutting machine, roller conveyor3.
3.The main technical parameters of the production line
Production plate width:400-1200mm
Production plate thickness:20-100 mm
Sheet volume weight:45-60 Kg / m3
Production speed:3-6 m/min
Dual-crawler belt machinelength:24m
Dual-crawler belt machine opening heat:300mm
Dual-crawler belt machine heating temp:60 °C
Total power : ABOUT 120 kw
Work flow:
manual uncoiler-- roll forming machine-- PLC control box-- hydraulic system-- post cut-- output table
| Article No. | Item Name | Specification |
| 1 | Width of feeding material | 1000mm coil sheet |
| 2 | Thickness of feeding material | 0.3mm-0.8mm coil sheet |
| 3 | Roller station | 2-15 stations |
| 4 | Shaft Diameter | 75-95mm |
| 5 | Productivity | 8-12m/min |
| 6 | Rollers' material | 45# steel forge |
| 7 | Shaft material | 45# steel |
| 8 | Weight | 2.5-8 ton |
| 9 | length | 5.5 m-11m |
| 10 | Voltage | 380V 50Hz 3phases |
| 11 | Control | PLC |
| 12 | Decoiler | 8 Tons |
| 13 | Motor | 3kw-15kw |
| 14 | Driving way | Chain transmission |
| 15 | Chain size | 0.6 inch-2 inch |
| 16 | Cutting system | Hydraulic cutter |
Profile :
1. How do I know which is the right machine for me?
Answer:
Just tell me what kind of product you want to make, and I will give suggestions according to it.
2. How do I know the output range?
Answer:
I will need size information (length, width, height) to calculate the weight of the product. And give suggestions due to the products for you.
3. How to get more information about the machine ?
Answer:
Contact information is displayed below. I would give the answers ASAP.
