Jiangsu milky way steel poles co.,ltd |
Verified Suppliers
|
|
Multi sides Africa 9m-15m Galvanized Steel Power Pole
Electric Pole with Galvanization
Steel
All of our material are purchased from famous mill factory to
assure the quality
A mill certificate issued by the mill factory with stamp and
signature must be provided before unload the material in our
factory ,otherwise we have our reason to refuse the material .
Before put into production ,all the material must pass the
chemical and physical analysis to make sure that they have
meet the requested strength and component.
Loading
Specifications:
Electric Pole Specification In Congo | |||||||
Height | Load(KN) | Top Diameter(mm) | Bottom Diameter(mm) | Wall Thickness(mm) | Pole Shape | Load Height(mm) | Material |
8M | 2.5 | 100 | 210 | 2.75 | 8 | 6.2 | Gr65 |
8M | 5 | 120 | 290 | 2.75 | 8 | 6.2 | Gr65 |
8M | 6.5 | 130 | 330 | 2.75 | 8 | 6.2 | Gr65 |
8M | 8 | 170 | 360 | 2.75 | 8 | 6.2 | Gr65 |
8M | 10 | 180 | 405 | 2.75 | 8 | 6.2 | Gr65 |
10M | 11 | 145 | 334 | 3 | 12 | 8 | Gr65 |
11M | 6 | 120 | 246 | 3 | 12 | 8.9 | Gr65 |
Electric Pole Specification In Congo | |||||||
11.8M | 5 | 150 | 355 | 3 | 8 | 9.4 | Gr65 |
11.8M | 6.5 | 180 | 400 | 3 | 8 | 9.4 | Gr65 |
11.8M | 8 | 190 | 440 | 3 | 8 | 9.4 | Gr65 |
11.8M | 10 | 190 | 450 | 3.5 | 8 | 9.4 | Gr65 |
11.8M | 12.5 | 220 | 500 | 3.5 | 8 | 9.4 | Gr65 |
11.8M | 16 | 230 | 560 | 3.5 | 8 | 9.4 | Gr65 |
11.8M | 20 | 240 | 585 | 4 | 8 | 9.4 | Gr65 |
11.8M | 25 | 260 | 655 | 4 | 8 | 9.4 | Gr65 |
11.8M | 32 | 260 | 660 | 5 | 8 | 9.4 | Gr65 |
Installation
-Remove all the equipment on the pole during Assembly.
-Circle a sling around th epole shaft of each section.
-Fix the sling on top section to one pulley block.
-The sling on the bottom section is tightly fixed and fixed
at the center of gravity.
-Make the steel pole vertical by tighten the sling of the top
section.
-Fix the steel pole.
-Remove the sling.
Galvanization
Standard:NFA91121
Average thickness of the galvanization:Not less than 86μm.
Manufacture Tolerance
-Component Length:-25mm to 75mm
-Straightness:2mm/m
-Twisting degree:1°per 3 meters length
-Ovalisation:Maximum is 3%
-The average diameter:+/-0.5%
-Slip length:+/-150mm
Company Introduction:
Jiangsu Milky Way Steel Poles which established on 1991 is
located in Wuxi,East of China ,near one of the largest sea
port of China ,Shanghai,Port .
Our Company has 24 years experience on producing the steel
poles including the transmission power pole,street light
pole,high mast pole and so on.
We exported to oversea countries since 1991 and our products
have been delivered to more than 70 countries and areas
,including America,Australia ,Russia ,Germany ,Span,Philippines
,Malaysia,Africa and so on.
We are the supplier of many big project in many
countries,like the street light pole of Dubai Tower.the high
mast pole for Sochi Winter Olympic Game and so on.