Jiangsu milky way steel poles co.,ltd |
Verified Suppliers
|
|
Polygonal Or Conical Galvanized Steel Pole Shockproof 1mm To 30mm Thickness
GENERAL SPECIFICATIONS FOR STEEL POLE | |||
Type | octagonal conical 20ft galvanized steel tubular pole distribution
poles column | ||
Suit For | Electricity distribution | ||
Shape | Conoid ,Multi-pyramidal,Columniform,polygonal or conical | ||
Material | Usually Q345B/A572,minimum yield strength>=345n/mm2 Q235B/A36,minimum yield strength>=235n/mm2 As well as Hot rolled coil from Q460 ,ASTM573 GR65, GR50 ,SS400, SS490 | ||
Power | 10kv~550kv | ||
Design Load in kg | 300~1000kg applied to 50cm from the top of the pole | ||
Surface Treatment | Hot dip galvanized Following ASTM A 123, color polyester power or
any other standard by client required. | ||
Joint of the poles | Insert mode,innerflange mode,face to face joint mode . | ||
Design of pole | Against earthquake of 8 grade | ||
Wind Speed | 160km/h 30m/s | ||
Standard | ISO 9001 | ||
Welding | We has past flaw testing.Internal and external double welding makes
the welding beautiful in shape Welding Standard :AWS ( American Welding Society ) D 1.1 | ||
Thickness | 1mm to 30mm |
Mechanical Property
The metal supports are designed to withstand the nominal force F and the pressure of the wind V applied
at 0.25m from the top. Under these loads, the safety factor with respect to the elastic limit of the steel is la
rger than 1.8. The post also resists a torque equal to (F+V) ×1m. Tests shows the load intervened when
breaking is around 2 times of design load.
Galvanization
Standard: NFA91121
Average thickness of the galvanization: Not less than 86
Manufacturer Tolerance
- Component Length: -25mm to 75mm
- Straightness: 2mm/m
- Twisting degree: 1̊ per 3 meters length
- Ovalisation : Maximum is 3%
- The average diameter : +/-0.5%
-Slip length: +/-150mm
Standard Accessory
- Top plate
- Base plate
- Bottom Strip
- Standard Hole
- Climbing Rung
- Anchor bolt
- Bitumen Protection
- Painted Marking
- Removable Ladder
The information to inquiry or purchase
- Steel pole height and force
- Cross arm type and length, the position to install in the steel pole
- The method to fix the cross arm (use Bolt to connect or use one or two template to weld in the steel
pole to install the cross arm)
- Safety factor of the steel pole
- Wind speed
- Type of climbing rung
- Destination port
- Others