|
[China]
Trade Verify
Address: No.1 Yinhe road, Wanshi town, Yixing, Jiangsu,China
Contact name:Delia Wang
Jiangsu milky way steel poles co.,ltd |
|
Verified Suppliers
|
|
|
8m 11m Factory Price Hot Dip Galvanized octagonal Steel Pole For Transmission line
Specification:
Application | Electricity distribution |
Shape | Octagonal |
Material | Usually Q345B/A572,minimum yield strength>=345n/mm2 Q235B/A36,minimum yield strength>=235n/mm2 As well as Hot rolled coil from Q460 ,ASTM573 GR65, GR50 ,SS400, SS490 |
Torlance of dimenstion | +- 2% |
Power | 10 KV ~550 KV |
Safety Factor | Safety factor for conducting wine : 8 Safety factor for grounding wine : 8 |
Design Load in Kg | 300~ 1000 Kg appliced to 50cm from the to pole |
Surface treatmen | Hot dip galvanized Following ASTM A 123, color polyester power or any other standard by client required. |
Joint of Poles | Insert mode,innerflange mode,face to face joint mode . |
Wind Speed | 160 Km/Hour . 30 m /s |
Standard | ISO 9001 |
Welding | We has past flaw testing.Internal and external double welding makes the welding beautiful in shape Welding Standard :AWS ( American Welding Society ) D 1.1 |
| Galvanization: | Hot dip galvanization with thickness of 80-100µm average in accordance with Chinese standardGB/T 13912-2002 or American standard ASTM A123, ISO: 2626-1985. |
Thickness | 1 mm to 30 mm |
Production Process | Rew material test → Cuttingj →Molding or bending →Welidng (longitudinal)→Dimension verify→Flange welding →Hole drilling →Calibration → Deburr→Galvanization or powder coating ,painting→Recalibration →Thread →Packages |
Packages | Our poles as normal cover by Mat or straw bale at the top and bottom ,anyway also can following by client required , each 40HC or OT can loading how many pcs will calculation base on the client actually specification and data. |
Certification:
1. Raw Material
Cutting the raw material that have meet all the standard required into different length and width. CNC laser cutting is used to direct the material or the laser beam generated. A typical commercial laser for cutting materials would involve a motion control system to follow a CNC or G-code of the pattern to be cut onto the material. The focused laser beam is directed at the material, which then either melts, burns, vaporizes away, or is blown away by a jet of gas, leaving an edge with a high-quality surface finish.
3. Molding
Our Company:
Established in 1991,Jiangsu Milky Way Steel
Poles is located in Wuxi,East of China ,near one of the largest sea
port of China ,Shanghai,Port . Our Products have been widely used
in the power transmsion ,signal transmission and ligting for street
,road ,square ,palaestra.and so on.
We have plenty of export experience . Since our
first overseas order from Pakstan in 1991 of 132 KV transmission
poels ,our products have been deliveried to more than 70 contries
and areas ,including America,Australia ,Russia ,Genmery
,Span,Philippines ,Malaysia , Dominica, Congo, Togo and Guniea so
on.
Service:
1. Reply your inquiry in 24 working hours. 2. Experienced staffs
answer all your questions in fluent English.
3. Customized design is available. UEM&UBM are welcomed.
4. Exclusive and unique solution can be provided to our customer by
our well-trained and professional engineers and staff.
5. Special discount and protection of sales are provided to our
distributor.
6. Professional factory : We are manufacturer, specializing in
producing all kinds of steel poles for more than 20 years,
competitive with good quantity.
7 Sample: We can send out sample for test in one week if the order
quantity is big enough. But the shipment charges is usually paid by
your side, the charges will be rebounded when we have formal order.
