Home Companies Jiangsu milky way steel poles co.,ltd

60FT Electric Power Pole With High-Strength Q235 And Q345 Material For Street Lighting

Jiangsu milky way steel poles co.,ltd

Contact Us

[China] country

Trade Verify

Address: No.1 Yinhe road, Wanshi town, Yixing, Jiangsu,China 

Contact name:Delia Wang

Inquir Now

Jiangsu milky way steel poles co.,ltd

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

60FT Electric Power Pole With High-Strength Q235 And Q345 Material For Street Lighting

Country/Region china
City & Province jiangsu
Categories Used Manufacturing & Processing Machinery Parts
InquireNow

Product Details

60FT Gr65 Material 6mm Electric Power Pole with climbing Rungs

 

Material:

The material we use is from Baosteel.According to the different strength request,we can use the Q235,Q345 and GR65.The strength of GR 65 is best and Q235 is lowest.
For the street light pole,we usually choose Q235 and Q345.
The good quality of steel material guarantee the good quality of the finished steel pole.

 

 

 Installation
 -Remove all the equipment on the pole during Assembly.
 -Circle a sling around th epole shaft of each section.
 -Fix the sling on top section to one pulley block.
 -The sling on the bottom section is tightly fixed and fixed at the center of gravity.
 -Make the steel pole vertical by tighten the sling of the top section.
 -Fix the steel pole.
 -Remove the sling.

 

 

 

 Specifications:

 

Material

Usually Q345B/A572,minimum yield strength>=345n/mm2
Q235B/A36,minimum yield strength>=235n/mm2
As well as Hot rolled coil from Q460 ,ASTM573 GR65, GR50 ,SS400, 
SS490, to ST52-

Power

10  KV ~550 KV

Safety Factor

Safety factor for conducting wine : 8 
Safety factor for grounding wine : 8

Design Load in Kg

300~ 1000 Kg applied to 50cm from the to pole

Marks

Name plate through rivert or glue ,engrave ,emboss as per customer requirement

Surface treatment

Hot dip galvanized Following ASTM A 123, 
color polyester power or any other standard by client required

Joint of Poles

Insert mode,inner flange mode,face to face joint mode

Design of pole

Against earthquake of 8 grade

Wind Speed

160 Km/Hour .  30 m /s

Minimum yield strength

355 mpa

Minimum ultimate tensile strength

490 mpa

Max ultimate tensile strength

620 mpa

Length of per section

Within 14m once forming without slip joint

Welding

We has past flaw testing.Internal and external double welding makes 
the welding beautiful in shape 
Welding Standard :AWS ( American Welding Society ) D 1.1

Thickness

1 mm to 30 mm

 

 

 

 

 


 

 

 

 More Photos:

 

 

 

 

 Company Introduction:
 Jiangsu Milky Way Steel Poles which established on 1991 is located in Wuxi,East of China ,near one of  the largest sea port of China ,Shanghai,Port .
 Our Company has 24 years experience on producing the steel poles including the transmission power  pole,street light pole,high mast pole and so on.
 We exported to oversea countries since 1991 and our products have been delivered to more than 70  countries and areas ,including America,Australia ,Russia ,Germany ,Span,Philippines ,Malaysia,Africa  and so on.
 We are the supplier of many big project in many countries,like the street light pole of Dubai Tower.the  high mast pole for Sochi Winter Olympic Game and so on.

 

 

 

 

 

 

 

Hot Products

Specification: name 7m Custom School / Villas Steel Galvanized High Mast Pole With Drawing Type ...
Quick Information Parking Lot Light Pole is a lighting application solution achieved by fundamental ...
Wholesale 33kv transmission line steel pole tower 11m 35ft steel tubular pole octagonal galvanized ...
35FT 3mm Thick Hot Dip Galvanized Electric Steel Pole Specifications: Suit for Electricity ...
Galvanized Steel Pole with 160Km/h Max Wind Velocity Q345 Q460 Surface Hot dip galvanizing Warranty ...
Hot Dip Galvanized Q345 GR65 Electric Power Pole for Longevity and Corrosion Resistance Application ...