|
[China]
Trade Verify
Address: No.1 Yinhe road, Wanshi town, Yixing, Jiangsu,China
Contact name:Delia Wang
Jiangsu milky way steel poles co.,ltd |
|
Verified Suppliers
|
|
|
36m Round Tapered Electrical Power Pole For Overhead Line, Custom Color
Material:
All of our material are purchased from famous mill factory to
assure the quality.
1.A mill certificate issued by the mill factory with stamp and
signature must be provided before unload
the material in our factory ,otherwise we have our reason to refuse
the material .
2.Before put into production ,all the material must pass the
chemical and physical analysis to make
sure that they have meet the requested strength and component.
Inspection:
To assure our products qualified ,we take steps as follows :
1. Management team : We have employ the foreign export to take
chaege of the overall managemnt ,
especailly the technical managemnt and quality management .
2.Introducing ISO management ,We are awared ISO 9001:2008
certificate.
3.QC Inpection:It is our company policy that all the finish product
should be inspected by our specialzed
QC in every manufacure steps and beofore every shipment.
Specifications:
Material | Usually Q345B/A572,minimum yield strength>=345n/mm2 |
Lamp power | 20 W- 400 W (HPS/MH) |
Torlance of the dimenstion | +- 2% |
Power | 10 KV ~550 KV |
Safety Factor | Safety factor for conducting wine : 8 |
Design Load in Kg | 300~ 1000 Kg appliced to 50cm from the to pole |
Marks | Nane palte through rivert or glue ,engrave ,emboss as per customer |
Surface treatment | Hot dip galvanized Following ASTM A 123,color polyester power or any |
Joint of Poles | Insert mode,innerflange mode,face to face joint mode . |
Design of pole | Against earthquake of 8 grade |
Wind Speed | 160 Km/Hour |
Minimum yield strength | 355 mpa |
Minimum ultimate tensile | 490 mpa |
Max ultimate tensile strength | 620 mpa |
Standard | ISO 9001 |
Length of per section | Within 14m once forming without slip joint |
Welding | We has past flaw testing.Internal and external double welding makes the |
Thickness | 1 mm to 30 mm |
Production Process | Rew material test → Cuttingj →Molding or bending |
Packages | Our poles as normal cover by Mat or straw bale at the top and bottom , |
Description:
Our Products have been widely used in the power transmsion ,signal transmission and ligting for street
,road ,square ,palaestra.and so on.
We have plenty of export experience . Since our first overseas order from Pakstan in 1991 of 132 KV
transmission poels ,our products have been deliveried to more than 70 contries and areas ,including
America,Australia ,Russia ,Genmery ,Span,Philippines ,Malaysia and so on
Design and Detail :
Lofting and design software :We have transmisson power pole design software which can help us
design all kinds of steel pole ,at the same time ,the TMA and LMA are adopted by us to provide the
design the drawing accuratly.
