Home Companies Jiangsu milky way steel poles co.,ltd

16m 1000 Dan High Voltage Electrical Project Steel Tubular Pole

Jiangsu milky way steel poles co.,ltd

Contact Us

[China] country

Trade Verify

Address: No.1 Yinhe road, Wanshi town, Yixing, Jiangsu,China 

Contact name:Delia Wang

Inquir Now

Jiangsu milky way steel poles co.,ltd

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

16m 1000 Dan High Voltage Electrical Project Steel Tubular Pole

Country/Region china
City & Province jiangsu
Categories Other Chargers
InquireNow

Product Details

Specifications:

 

HeightFrom 9 meter to 100 meter
Suit forElectric Power Transmission and Distribution
ShapePolygonal or Conical
Material

Normally Q345B/A572, Minimum Yield Strength ≥ 345 N/mm²

Q235B/A36, Minimum Yield Strength ≥ 235 N/mm²

As well as Hot rolled coil from ASTM A572 GR65, GR50, SS400

Power Capacity10kV to 220kV
Tolerance of the dimensionAccording to client’s requirement.
Surface treatment

Hot dip galvanized Following ASTM A 123, or any other standard

by client required.

Joint of PolesSlip joint, flanged connected
StandardISO 9001:2008
Length of per sectionWithin 14 meter once forming
Welding StandardAWS (American Welding Society ) D 1.1
Thickness1 mm to 36mm
Production Process

Raw material test → Cutting →bending →Welding (longitudinal )

→Dimension verify →Flange welding →Hole drilling →sample

assemble → surface clean→ Galvanization or powder coating ,

painting →Recalibration →Packages

PackagesPacking with plastic paper or according to client’s request.

 

 

Steel

Descripition of material:The material is in accordance with NF EN 10025
Standard and NF EN 10149 Standard,it has the following property.
-Yield Strength=355N/mm2
-Toughness remains the same under 20 degrees below zero.
-Galvanization is in accordance with NFA35503 Standard Class 1.

ISO Standard High Voltage Electrical Metal Power Pole AWS D 1.1 0

 

Galvanization
Standard:NFA91121
Average thickness of the galvanization:Not less than 86μm.

ISO Standard High Voltage Electrical Metal Power Pole AWS D 1.1 1

 

 

Installation
-Remove all the equipment on the pole during Assembly.
-Circle a sling around th epole shaft of each section.
-Fix the sling on top section to one pulley block.
-The sling on the bottom section is tightly fixed and fixed at the center of gravity.
-Make the steel pole vertical by tighten the sling of the top section.
-Fix the steel pole.
-Remove the sling.

ISO Standard High Voltage Electrical Metal Power Pole AWS D 1.1 2

 

Company Introduction:
Jiangsu Milky Way Steel Poles which established on 1991 is located in Wuxi,East of China ,near one of the largest sea port of China ,Shanghai,Port .
Our Company has 24 years experience on producing the steel poles including the transmission power pole,street light pole,high mast pole and so on.
We exported to oversea countries since 1991 and our products have been delivered to more than 70 countries and areas ,including America,Australia ,Russia ,Germany ,Span,Philippines ,Malaysia,Africa and so on.
We are the supplier of many big project in many countries,like the street light pole of Dubai Tower.the high mast pole for Sochi Winter Olympic Game and so on.

 

 

Hot Products

Customized outdoor 4m 5m 6m 7m 8m 9m 10m 12m double single arm price galvanized steel solar street ...
345Mpa Tubular Hot Dip Galvanized Steel Pole 2.75mm 3.0mm 3.75mm 4.0mm Thick ​​ Specification ...
Specifications: Material: Hot rolled steel, Q235,Q345,S235,S355,SS400,Gr 50 Yield strength of ...
1. solar street light pole 2. High light transmission and efficiency 3. Solid, rustproof and durable ...
2.75mm 5-6m Hot Dip Galanization Flange Type Street Light Steel Pole Suit for Airport ,seaport, ...
6m 7m 8m flange type street light steel pole for road and highway Suit for Airport ,seaport, plaza, ...