|
[China]
Trade Verify
Address: No.1 Yinhe road, Wanshi town, Yixing, Jiangsu,China
Contact name:Delia Wang
Jiangsu milky way steel poles co.,ltd |
|
Verified Suppliers
|
|
|
6mm Octagonal 90FT Electrical Steel Utility Poles With Cross Arm Corrosion Resistance
Description:
Our Transmission Pole is designed for the high voltage power
transmission and low voltage power transmission.
Designed and manufacutred for durability, corrosion
resistance and visual appeal.
Specifications:
Height | From 9 meter to 100 meter |
Suit for | Electric Power Transmission and Distribution |
Shape | Polygonal or Conical |
Material | Normally Q345B/A572, Minimum Yield Strength ≥ 345 N/mm² Q235B/A36, Minimum Yield Strength ≥ 235 N/mm² As well as Hot rolled coil from ASTM A572 GR65, GR50, SS400 |
Power Capacity | 10kV to 220kV |
Tolerance of the dimension | According to client’s requirement. |
Surface treatment | Hot dip galvanized Following ASTM A 123, or any other standard by client required. |
Joint of Poles | Slip joint, flanged connected |
Standard | ISO 9001:2008 |
Length of per section | Within 14 meter once forming |
Welding Standard | AWS (American Welding Society ) D 1.1 |
Thickness | 1 mm to 36mm |
Production Process | Raw material test → Cutting →bending →Welding (longitudinal )→ Dimension verify →Flange welding →Hole drilling →sample assemble → surface clean→ Galvanization or powder coating ,painting →Recalibration → Packages |
Packages | Packing with plastic paper or according to client’s request. |
Descripition of material:
1. Poles are made by the high-quality metal plants,which were molded into the multi-row cone-
shaped vertical steel barwith hot galvanized anti-corrosion treatment
2. Light plate frame is made by high-quality stainless steel
3. Fastened bolts and nuts of stainless steel
More Pictures:
Installation
-Remove all the equipment on the pole during Assembly.
-Circle a sling around th epole shaft of each section.
-Fix the sling on top section to one pulley block.
-The sling on the bottom section is tightly fixed and fixed
at the center of gravity.
-Make the steel pole vertical by tighten the sling of the top
section.
-Fix the steel pole.
-Remove the sling.
