Slit Edge Industrial Black Steel Plate Nm360 Nm400 Wear Resistant Carbon
Steel Sheet
1. Production Process
1) Steelmaking process Flow Chart
Blast Furance+Hot Metal Ladle Truck+KR Hot Metal
Treatment+Converter+LF Refining Furnace+RH Vacuum Degassing
Furance+Con-cast
2. Rolling Process Flow Chart
Reheating Furance+High-pressure Water Descaling+Edger Mill+Roughing
Mill+Finishing Mill+Accelerated cooling+Hot Leveler+Marking and
Spray Printing+Cooling Bed+On-line UT+Crop Shear+Double-side
Trimming Shear+Cut-to-length Shear+Measurement+Marking and Spray
Printing+Cold Leveler/Heat treatment
3. Heat-Treatment Flow Chart
Plate+Shot Blasting+Quenching Furance+Quenching Machine+Tempering
Furance+Warm Leveler+Cooling Bed+Cutting+Cold
Leveler+Finishing&Packaging
4. Thickness and Width
Thickness:3mm-150mm
Width:1600mm-4100mm
5. Main Grade
Germany:XAR400,XAR450,XAR500,XAR600,Dillidur400,Dillidur500
Belgium:QUARD400,QUARD450,QUARD500
France:FORA400,FORA500,Creusabro4800,Creusabro8000
Baosteel:B-HARD360,B-HARD400,B-HARD450,B-HARD500
HBIS:NM360,NM400,NM450,NM500
Finland:RAEX400,RAEX450,RAEX500
Japan:JFE-EH360,JFE-EH400,JFE-EH500,WEL-HARD400,WEL-HARD500
6. Chemical Composition&Property
Grade | c | Si | Mn | P | S | Al | Cr+Ni+Mo | Nb+V+Ti |
NM400 | 0.10-0.40 | 0.20-0.40 | 1.00-2.00 | Max 0.015 | Max 0.003 | Min 0.020 | Max 0.9 | Trace Amount |
NM450 | 0.10-0.40 | 0.20-0.40 | 1.00-2.00 | Max 0.015 | Max 0.003 | Min 0.020 | Max 1.2 |
NM500 | 0.10-0.40 | 0.20-0.45 | 1.00-2.00 | Max 0.015 | Max 0.003 | Min 0.020 | Max 1.5 |
NM550 | 0.10-0.50 | 0.20-0.45 | 1.00-1.50 | Max 0.015 | Max 0.003 | Min 0.020 | Max 2.0 |
NM600 | 0.10-0.50 | 0.20-0.45 | 1.00-1.50 | Max 0.015 | Max 0.003 | Min 0.020 | Max 2.5 |
XCHD400 | 0.10-0.30 | 0.20-0.40 | 1.00-2.00 | Max 0.015 | Max 0.003 | Min 0.020 | Max 0.1 |
XCHD450 | 0.10-0.40 | 0.20-0.40 | 1.00-2.00 | Max 0.015 | Max 0.003 | Min 0.020 | Max 0.9 |
XCHD500 | 0.10-0.40 | 0.20-0.45 | 1.00-2.00 | Max 0.015 | Max 0.003 | Min 0.020 | Max 1.5 |
Application:
1) Thermal power plant: lining plate of medium speed pulverizer barrel, impeller shell of
fan, inlet flue of dust remover, ash duct, lining plate of bucket
wheel, connecting pipe of separator, lining plate of coal crusher,
lining plate of coal hopper and crusher, burner burner nozzle,
lining plate of coal hopper and funnel, air preheater support,
guide vane of separator. The above parts have no high requirements for the hardness and wear
resistance of the wear-resistant steel plate. The wear-resistant steel plate with the material of NM360 / 400 and
the thickness of 6-10 mm can be used.
2) Coal Yard: feed chute and hopper lining, hopper lining, fan
blade, pusher bottom plate, cyclone dust collector, coke guide
lining, ball mill lining, bit stabilizer, screw feeder bell and
base, Kneader bucket lining, ring feeder, tipper bottom plate. The working environment of the coal yard is very bad, so it has
certain requirements for the corrosion resistance and wear
resistance strength of the wear-resistant steel plate. It is recommended to use the nm400 / 450 wear-resistant steel plate
with a thickness of 8-26mm.