Active Member
|
[China]
Address: 50 Meter North of Diwo Village ,Anping County,Hengshui City,Hebei Province,China
Contact name:Kelsey
Anping Aobiao Wire Mesh Products Co.,Ltd |
|
|
Powder Coated Black Spear Top Steel Tubular Fencing For Villas
Product Description
1. Powder coated black Steel Tubular Fencing panel is popular in US market and AU market, they can improve the appearance and increase the value of your property. They do not corrode and rust. It gives you a great look and the ultimate combination of strength, beauty, and durability.There is many types of steel fence for your requirements, difference finals, different picket for your choice.
2. The powder coated black Steel Tubular Fencing is a equipment to keep your property and your kids,pets safe. Because wrought iron material is very durable, it can use for a fairly long time for not being rusty.Coated with primer, powder, it is sturdy to guard your home. All our outdoor wrought iron items are being hot-dipped galvanized and then polished, stained to create smooth surface, joints were welded fully.
Common Specification of the Powder coated black Spear Top Steel Tubular Fencing:
1. 2.4m Wide x 2.1m Height is the standard size for Australia
2. 40x40x1.6mm top and bottom rail, 25x25x1.2mm Verticals.
3. There are 17 vertical pickets 25x25mm with spear.
4. Gap in between the pickets is 110mm
5. Post: 60x60x2.0mm or 80x80x2.0mm.
| Product Name | Powder Coated Black Spear Top Steel Tubular Fencing For Villas |
| Material | Steel Q195 |
| Surface Treatment | Powder Coated Black/Grey/Cream/Green |
| Color | Black,White,Green or as you required |
| Roll | 30*30mm/32*32mm/38*25mm/40*40mm/45*45mm |
| Picket Space | 100mm/110mm/116mm/124mm/130mm |
| Panel Height | 1000mm/1200mm/1400mm/1500mm/1800mm/2000mm/2100mm/2400mm |
| Picket | 16*16mm/19*19mm/25*25mm |
| Panel Width | 1800mm/2000mm/2300mm/2400mm/2500mm |
| Type | Flat Top/Loop Top/Spear Top/Bent Top |
Usage of Powder Coated Black Spear Top Steel Tubular Fencing:
Widely used in villas,community,gardens,schools,factories and other flower beds,lawns,industrial and mining enterprises,financial institutions, sports stadiums,convention centers, squares, roads, balconies,residential use,its flowing lines,simple and beautiful and full of richmodern residential sensual,garden Light,villas era of high-grade.Simple installation,easy maintenance,easy to clean,affordable,eliminating maintenance.
Production.
Advantage of Powder Coated Black Spear Top Steel Tubular Fencing:
We will sand the surface of the Powder Coated Black Spear Top Steel Tubular Fencing panels and post. And then the surface will smooth and clear some impurities.
We use the Akzo Nobel to powder coating the wrought iron fence panels and post. It is stain black.
It will not leave out the powder and insure the zinc coating will not rust.
The surface of the powder coated black wrought iron fence panel and post is very smooth.
Our QC will check the quality when powder coating.We will remove the unqualified product.
The powder coated black steel tubular fencing panels will be packed with one fence panel into one plastic bag, then stacked on the steel pallet with a carton on the base to avoid scratching during transport and carton board outside.
The stacking on the pallet will alternate spear top to base of the panel. The Spear tops should always be recessed at least 40mm within the base on the previous panel underneath. This will assist to prevent any spears from bending during shipping and handling.
Each powder coated black steel tubular fencing post is to be fitted with a cap and wrapped in plastic for protection. Then stacking on steel pallets.
Brackets and fasteners:The brackets will put in small cartons. The fasteners will put in small plastic bags and then in small cartons.
