|
[China]
Trade Verify
Address: Da Lingtou Industrial Zone, Butou Village, Tanbu Town, Huadu District, Guangzhou, China
Contact name:Andy Su
Guangzhou Guangxin Communication Equipment Co., Ltd. |
|
Verified Suppliers
|
|
|
4 Leg 4g Cell Mobile Phone Steel Tower 60m Wireless Round Tube Galvanized Steel
Specification:
1. Material: Normally Q345B/A572, Minimum Yield Strength ≥ 345
N/mm²
Q235B/A36, Minimum Yield Strength ≥ 235 N/mm²
As well as Hot rolled coil from ASTM A572 GR65, GR50, SS400, or any
other standard by client required.
2. Tower Type: Steel Tube, Angle Steel, Lattice Mast,
Self-supporting
3. Tower Style: Mono Pole Tower, Three Legs Tower, Four Legs Tower
4. Height: Below 100 meter, customized.
5. Wind Pressure: 0.35-1 KN/m2
6. Connection: Flanges, Inserting, Connecting Plate & Bolt
7. Surface Treatment: Hot Dipped Galvanized
8. Zinc Coating: 65μ-85μ
9. Supply Capacity: 1500 MT/Month
10. Color: Galvanized, or customized
11. Usage: GSM, RRU, CDMA, Micro Wave, Radio etc.
12. Certification: ISO9001:2008, ISO14001:2004, OHSAS18001: 2007,
SGS, MA
Feature:
1, Design layout and drawing, set up specifications and sizes.
2, Buy row seamless steel pipes or flat steel plates and folding
and welding them to be tubular pipes as well as galvanized steel
bolts, nuts, washers and springs.
3, Measure and cut out sizes and holes.
4, Weld necessary parts (such as footing plates, connecting flanges
and gussets, antenna mounts, lightning rod, ladder etc.)
5, Polish burrs and welding scars to make all members good surface.
6, Assemble tower sections according to drawings, make sure sizes
and connecting parts are correct.
7, Hot dip galvanization: clean surface corrosion and oil with acid
or other chemicals-->clean with water-->dip in
cosolvents-->dry-->dip in hot zinc pool for
galvanization-->cooling and curing-->clean-->dry
8, Check quality and start packing.
Guangxin manufactory supplied self supporting 4 legged telecom steel tube tower are made of steel tube, designed on a tubular base pattern.The communication tower is optimized for medium to heavy loads which is used for standard cellular sites. 4 Legs Tubular High Quality 60m Telecommunication Steel Tower can be equipped with a variety of accessories, such as work or rest platforms, antenna mounts, safety devices,obstruction lights, lightning protection kit and more. All of the accessories can be installed at any desired height and orientation according to customer Specification.
Specifications of Tubular Steel Tower
| Material | Angle steel plates, flat steel plate, bolts and nuts |
| Steel Type | Weldable low carbon structural steel |
| Steel Grade | GB Q235, Q345, BS 4360, ASTM A36 etc. |
| Yield Strength | Fy≥235MPa |
| Tensile Strength | Fu≥400MPa |
| Elongation | σ≥20% |
| Surface Finish | Hot dip galvanization |
| Galvanized layer | T≥65μm |
| Height | 20m to 100m, customized to requests |
| Design | 4 legs self-supporting or free standing lattice tower |
| Structure | 1 to 5 platforms, each platform comes with 4 to 6 brackets for mounting antennas or specified number of brackets for mounting antennas, microwaves, RRUs and other devices. |
| Supply mode | CKD(Complete Knocked Down), SKD(Semi-Knocked Down), DKD(Direct Knocked Down) |
| Fixing/Fastening | Bolts and nuts, connecting plates |
| Configuration | Foundations/anchoring bolts, tower sections, 1-5 platforms (optional), mounting brackets, ladder, anti-fall safety system, lightning rod, earthing plate etc. |
| Wind Load | 0.35-1.0kN/sqm |
| Lifespan | 20-50 years |
| Warranty | 3 years |
| Applications | GSM/3G/4G/5G/FM radio antennas, microwaves, telecom stations. |
