10 Tons A5 Mobile Double Girder Grab Gantry Crane MZ Type Electrical For Grabbing

10 tons A5 MZ type electrical mobile double girder grab gantry crane for grabbing

MZ type double girder gantry crane with grab is mainly used with overhead traveling crane, port machine and hinge car. It is widely used in ports, power plants, docks, chemical industry, etc. to grab all kinds of loose accumulations, Such as: ore, coal, slag loading, unloading, light reactor, feeding and other operations. Gantry Crane unloads bulk cargoes such as coal, ore and phosphate from the hold to the funnel and unloads it to the yard or loading dock via conveyor belt. Lifting Equipment Grab bridge cranes are used for bulk materials and bulk materials.

product configuration:

This product is composed of box-shaped bridge frame, cart running mechanism, trolley, grab bucket and electrical equipment, all of which are operated in the cabin control room.

• The pick-up device is a four-rope grab bucket with double drums, which is simple in structure and reliable in operation. The grab can be opened and closed at any height. When the grabbing material particles are less than 100mm, the effect is good and the production efficiency is high. When the grabbed particles are 200mm large, a toothed grab is required. The grab bucket is more suitable for bulk materials in a natural accumulation state. When grabbing underwater materials or special materials, it must be specially proposed in the order. When using in the open air, waterproof equipment must be provided.

1. Heavy duty double beam/girder gantry with grab as lifting tool.

2. Working duty could be A5-A8.

3. Soft start, 3-5 speeds to operate, very stable to lift and running.

4. Six direction action, to make sure the enough wide working area.

5. Strong box type steel structure of crane

6. Full safety system as follows:

• Weight overload protection
• Emergency stop system
• Over current protection,Short-circuit protection
• Phase sequence protection
• Zero position protection
• Voltage loss protection
• Crane long traveling and cross traveling limit switch and stopper
• Lifting overhigh and overlow limit switch

• Both side of all the steel plate of crane are pretreatment by pretreatment production line, Sand blasting-- Primer spray--Primer drying. Eliminate the innerstress of steel plate, increase the adhesive force of the steel structure. Ensure the appearance and anticorrosion quality.
• Steel plate cutting adapt whole sets Messer CNC plasma cutting machine from Germany, very fast cutting speed, little deformation, High precision, Deviation could be controlled within 1mm, it insure the raw material at high quality standard and can reach top level in the industry.
• The welding of main beam adapt high efficiency and intelligent welding robot, Henan Mine Crane CO., LTD are No.1 enterprise who adapt this high technology machine. The welding joint inside of the main beam adapt advanced MAG welding, adapt Ar+CO2 mixed protective gas, The 4 welding joint outside of the main beam adapt automatic submerged-arc fillet welding machine.
•  The welding of main beam adapt radiographic inspection and ultrasonic flaw detection for the welding joint and fillet weld position
• The welding of end beam adapt double gun gantry submerged arc welding, highly welding quality ensure the stable quality of the crane effectively.
• Adapt the steel plate rolling drum and wireless steel tube, Henan Mine Crane CO., LTD has a set of steel plate rolling drum producing and processing line which is industry-leading level. From pre-bending by 1250t press machine, to Edge rolling by three-roller plate roll, at last the longitudinal joint and circumferential joint of drum are welded by automatic welding center and drum processed by heavy duty CNC horizontal machine tool

Design standard:

1.Design rules for cranes GB/T3811-2008

2.Safety rules for lifting appliances GB6067.1-2010

3.General Gantry Crane GB/T14406-2011

4.Gantry crane manufacturing and tolerances of rail installation GB/T10183-2005

5.Crane test specification and procedures GB/T5905-1986

6.Crane electric control equipment JB/T4315-1997

7.Important application wire rope GB8918-2006

8.Carbon structure steel GB/T700-2006

9.Low alloy high strength structure steel GB/T1591-2008

10.Welding joint radiographic inspection standard JB928-1994

11.Steel welding joint manual ultrasonic flaw detection way GB11345-1989

Choose our gantry crane which features advanced technology, competitive price and quick delivery.

1. Russia

MG36T-25M,H-9.5M A6, 1set
MG100/10t-42m,h-14m,A5, 2sets
2. Pakistan

MG35T(17.5+17.5)-20M,H-15M,A6, 2sets
3. Kazakhstan

MG50/10T-20m,h-12m A7, 2sets
4.Algeria

MG40t-20m,h-6m,A6, 1set
5. Mongolia

MG25t-32m+7+7,h-10m A6,1set
6. India:
MG10t-32m+7+8,h-9.5m,A7, 2sets
MG5t-32m+8+8,h-9.5m,A7, 2sets

>>KY Crane is the best seller. We have exported overhead crane to more than 120 countries.

>>We could supply you all kinds of industry cranes and cranes spareparts from 0.25~900tons with the most competitive price.

Pre-sale service

>>Efficient response rate during office hours.

>>Professional and comprehensive crane design consultation.

>>Sincere and friendly service attitude.

After-sale service

>>One and a half year warranty for whole machines.

>>Providing free quick-wear part.

>>Low charge for continue maintenance when warranty is expired.

>>Remote online video support for technical and repair installation.

Main products:

Established in China in 2002, Henan Mine Group is a multi-national specialist designer, manufacturer & supplier of:
* Overhead Bridge Cranes
* Gantry Crane
* Ladle Foundry Crane
* Rail Mounted Gantry Crane (RMG)
* Slewing jib cranes
* Electric wire rope hoists

* Electric winch

* Euro hoist

* Lifting platform
* Crane component sets
* Material handling equipment

Logistics system:

Contact us