|
[China]
Trade Verify
Address: No.4 Building , No.388, Kongjiang Road,Yangpu District,200093,Shanghai,China
Contact name:Emily
Shanghai Wind Automation Equipment Co.,Ltd |
|
Verified Suppliers
|
|
|
Armature Commutator Hydraulic Press Machine Motor Parts Placement Device WIND-Y32-3T
(1) Application
Press armature commutator to armature vertically,
Insert the commutator to the shaft,
Place the shaft to lamination stack,
Press the ball bearing to end plate.
(2) Compretitive Advantages
1. The commutator be pressed consistanctly each time at same location of armature relative position
2. Armature commutator and stack position is very important for armature automatic winding machine
indexing consistantly
(3) Parameter
| Name | Unit | Parameter |
| Nominal force (hydraulic cylinder) | KN | 25 (2.5Ton) |
| Pressure sensor | KN | 30 |
| System pressure | Mpa | 5.5 |
| Maximum stroke of oil cylinder | mm | 200 |
| Maximum stroke of electronic ruler | mm | 250 |
| Rapid depressing speed | mm/s | 50 |
| Slow depressing speed | mm/s | 0~50 |
| Return speed | mm/s | 80 |
| Oil pump | / | Vane pump |
| Motor | kw | 1.5 |
| Voltage | V | 380 |
| Outline dimensions ( length × width × height ) | mm | 950X650X1800 |
