|
[China]
Trade Verify
Address: NO.288,YOUYI ROAD ,XI SHAN DISTRICT,WUXI CITY,CHINA
Contact name:Gao Ben
JIANGSU MITTEL STEEL INDUSTRIAL LIMITED |
|
Verified Suppliers
|
|
|
Monel 400 Bar Copper Nickel Alloy Monel 400 Welding Rod Monel 400 Weld Wire
Monel 400
| UNS | Trademark | W.Nr |
| N04400 | Monel400 | 2.4360 |
Monel 400 Chemical composition
| Alloy | % | Ni | Cu | Fe | C | Mn | Si | S |
| Monel400 | Min. | Bal | 28 | |||||
| Max. | 34 | 2.5 | 0.3 | 2 | 0.5 | 0.024 |
Monel 400 Physical properties
| Density | 8.83 g/cm³ |
| Melting point | 1300-1390 °C |
Minimum mechanical properties in the room temperature
| Alloy state | Tensile strength Rm N/mm² | Yield strength RP0.2 N/mm² | Elongation A 5 % |
| Monel400 | 480 | 170 | 35 |
Monel 400 Characteristic
Monel 400 is an extremely combination property that use for largest
amount and most widely corrosion resistance alloy. This alloy in
the hydrofluoric acid and fluoride gas medium with excellent
corrosion resistance, as well as to the hot concentrated alkali. At
the same time, is also corrosion resistant to neutral solution, sea
water, air, organic compounds. An important feature of this is
generally do not generate a stress corrosion cracking, good cutting
performance.
Monel 400 Metallurgical structure
Monel 400 alloy is high-intensity single-phase solid solution.
Monel 400 Corrosion resistance
Monel 400 alloy in the fluoride gas, hydrochloric acid, sulfuric
acid, hydrofluoric acid and their derivatives have a very good
corrosion resistance property, and possess better corrosion
resistance more than the copper alloy in the sea water. Acid
medium: Monel 400 have corrosion resistance in less than 85%
consistency of sulfuric acid. Monel 400 is an important material
that resistant to hydrofluoric acid. Water corrosion: Monel 400
alloy in most corrosion cases of water, not only excellent
corrosion resistance, but also less pitting, stress corrosion, the
corrosion rate less than 0.025mm / a. High temperature corrosion: Monel 400 for the work of the
highest temperature at about 600 °C in general in the air, in the high temperature steam, the corrosion
rate less than 0.026mm / a. Ammonia: Monel 400 can be resistant to an hydrous ammonia and
aminate conditions corrosion below 585 °C due to the high nickel.
Monel 400 Application field:
Monel 400 alloy is a multi-purpose material in many industrial
applications:
1. Seamless water pipe in the power factory
2. Sea-water exchanger and evaporator
3. Sulfuric acid and hydrochloric acid environment
4. Crude distillation
5. Sea-water in the use of equipment and propeller shaft
6. Nuclear industry and used in the manufacture of uranium
enrichment isotope separation equipment
7. Manufacturing hydrochloric acid equipment used in the production
of pump and valve
| Standard | GB, AISI/JIS, SUS, UNS, DIN 17440 17220(BS970 Part4) |
| Material | Monel 400 |
| OD | 1.0-400mm |
| Length | 3000mm, 6000mm or according to the customer's requirement. |
| Place of Origin | Shanxi |
| Brand Name | Tisco |
| Type | Round bar, square bar, flat bar, hexagon bar, angle bar, channel bar, threaded bar |
| Use | Petroleum, chemical, construction, textile, medicine, aviation, aerospace, railway, highway, landscape protection, metallurgical machinery and other fields. |
| Certificate | ISO9001 |
| Surface | bright,pickled,black |
| Technique | Forged/Hot Rolled/Cold Drawn/Peeled |
| Category | 1.Round bar 1)Hot rolled black bar: (5-400)x6000mm or according to your requirement. 2)Acid round bar: (5-400)x6000mm or according to your requirement. 3)Cold drawn bright bar: (1-20)x6000mm or according to your requirement. 4)Polishing round bar: (5-400)x6000mm or according to your requests. |
2. Square bar 1)Hot rolled black bar: (5*5-400*400)x6000mm or according to your requests. 2)Acid square bar: (5*5-400*400)x6000mm or according to your requests. 3)Cold drawn square bar: (1*1-20*20)x6000mm or according to your requests. 4)Polishing square bar: (5*5-400*400)x6000mm or according to your requests. | |
3. Flat bar 1)Hot rolled flat bar: (3-30)*(10-200mm)*6000mm or according to your requests. 2)Cold drawn flat bar: (3-30)*(10-200mm)*6000mm or according to your requests. | |
4. Hexagon bar 1)Hot rolled hexagon bar: (5-100)x6000mm or according to your requests. 2) Acid hexagon bar: (5-100)x6000mm or according to your requests. 3)Cold drawn hexagon bar: (1-20)x6000mm or according to your requests t. 4)Polishing hexagon bar: (5-100)x6000mm or according to your requests. | |
5. Channel bar 1)Hot rolled channel bar: (5-100)x6000mm or according to your requests. 2)Acid channel bar: (5-100)x6000mm or according to your requests. 3)Cold drawn channel bar: (1-20)x6000mm or according to your requests. | |
6. Threaded bar 1)Hot rolled threaded bar: (5-100)x6000mm or according to your requests. 2)Acid threaded bar: (5-100)x6000mm or according to your requests. 3)Cold drawn threaded bar: (1-20)x6000mm or according to your requests. | |
7. Angle bar 1)Hot rolled angle bar: (16-200)x(16-200)x(3-18)x(3000-9000)mm or according to your requests 2)Acid angle bar: (16-200)x(16-200)x(3-18)x(3000-9000)mm or according to your requests. 3)Cold drawn angle bar: (16-200)x(16-200)x(3-18)x(3000-9000)mm or according to your requests. | |
| Diameter± | H9 tolerance can reach the industry standard |
| Quality | Our production equipment 24 hours of continuous temperature work, to ensure the unity of the product roundness, elongation, tensile strength and yield strength. Welcome customers to our company to detect the products before shipment. For the customers who are not inconvenient, quality assurance can be laid down in the contract, we will take charge of the returning and shipping fee if there is any problems of the product quality, so it will dismiss any of your worry about our products. |
| Package | Standard seaworthy packing(plastic&wooden) or according to the customer's requests |
| Delivery time | 5-8days, according to the quantity |
| Productivity | 4500 tons/month |
| Remarks | OEM/Sample/Mixed item/Factory visit are welcome |
Product details
Packing & shipping
