|
[China]
Trade Verify
Address: A302, No.581 Xiuchuan road, Pudong new area, Shanghai 201299, China
Contact name:Carl
Shanghai Haosteel Co., Limited |
|
Verified Suppliers
|
|
|
ASTM A269 TP304 316L stainless coil tubing pipe
HAOSTEEL is one of the most professional manufacturer and supplier
of stainless steel Tube.Stainless steel tube can be divided into
seamless tube and welded tube according to production mode.
Seamless tube can be divided into hot rolled tube, cold rolled
tube, cold drawn pipe and extruded tube.The welded pipe is divided
into straight welded pipe and spiral welded tube.
Description
The performance of this series of products has passed the requirements of ASTM A269 APIRP5 C7 and JISG4305 project standards through China National Petroleum Corporation, Petroleum Pipeline Supervision and Inspection Center, and CNOOC Bohai Company. This series of products is supplied to domestic land and sea oil exploitation and has been exported. Singapore, Russia and other countries.
| Item | Material grade | Size | Length/roll | Pressure(Mpa) |
| 1 | 316L,304L,304 | 1/8″×0.025″ | 3200 | 80 |
| 2 | 316L,304L,304 | 1/8″×0.035″ | 3200 | 100 |
| 3 | 316L,304L,304 | 1/4″×0.035″ | 2000 | 100 |
| 4 | 316L,304L,304 | 1/4″×0.049″ | 2000 | 100 |
| 5 | 316L,304L,304 | 3/8″×0.035″ | 1500 | 80 |
| 6 | 316L,304L,304 | 3/8″×0.049″ | 1500 | 100 |
| 7 | 316L,304L,304 | 1/2″×0.049″ | 1000 | 80 |
| 8 | 316L,304L,304 | 1/2″×0.065″ | 1000 | 100 |
| 9 | 316L,304L,304 | φ3mm×0.7mm | 3200 | 80 |
| 10 | 316L,304L,304 | φ3mm×0.9mm | 3200 | 100 |
| 11 | 316L,304L,304 | φ4mm×0.9mm | 3000 | 100 |
| 12 | 316L,304L,304 | φ4mm×1.1mm | 3000 | 100 |
| 13 | 316L,304L,304 | φ6mm×0.9mm | 2000 | 100 |
| 14 | 316L,304L,304 | φ6mm×1.1mm | 2000 | 100 |
| 15 | 316L,304L,304 | φ8mm×1mm | 1800 | 80 |
| 16 | 316L,304L,304 | φ8mm×1.2mm | 1800 | 100 |
| 17 | 316L,304L,304 | φ10mm×1mm | 1500 | 70 |
| 18 | 316L,304L,304 | φ10mm×1.2mm | 1500 | 70 |
| 19 | 316L,304L,304 | φ10mm×2mm | 500 | 100 |
| 20 | 316L,304L,304 | φ12mm×1.5mm | 500 | 80 |
| Remarks: material grade, size, length can be as client requst to produce. | ||||
Product show:
Chemical Composition about stainless steel Tube
| Grade | C | Si | Mn | P | S | Ni | Cr | Mo |
| 201 | ≤0.15 | ≤0.75 | 5.5-7.5 | ≤0.06 | ≤0.03 | 3.5-5.5 | 16.0-18.0 | - |
| 202 | ≤0.15 | ≤1.0 | 7.5-10.0 | ≤0.06 | ≤0.03 | 4.-6.0 | 17.0-19.0 | - |
| 301 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 6.0-8.0 | 16.0-18.0 | - |
| 302 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 8.0-10.0 | 17.0-19.0 | - |
| 304 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 8.0-10.5 | 18.0-20.0 | - |
| 304L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 9.0-13.0 | 18.0-20.0 | - |
| 309S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 12.0-15.0 | 22.0-24.0 | - |
| 310S | ≤0.08 | ≤1.5 | ≤2.0 | ≤0.035 | ≤0.03 | 19.0-22.0 | 24.0-26.0 | - |
| 316 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 10.0-14.0 | 16.0-18.0 | 2.0-3.0 |
| 316L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 12.0-15.0 | 16.0-18.0 | 2.0-3.0 |
| 321 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 9.0-13.0 | 17.0-19.0 | - |
| 630 | ≤0.07 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 3.0-5.0 | 15.5-17.5 | - |
| 631 | ≤0.09 | ≤1.0 | ≤1.0 | ≤0.030 | ≤0.035 | 6.50-7.75 | 16.0-18.0 | - |
| 904L | ≤2.0 | ≤0.045 | ≤1.0 | ≤0.035 | - | 23.0-28.0 | 19.0-23.0 | 4.0-5.0 |
| 2205 | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.030 | ≤0.02 | 4.5-6.5 | 22.0-23.0 | 3.0-3.5 |
| 2507 | ≤0.03 | ≤0.80 | ≤1.2 | ≤0.035 | ≤0.02 | 6.0-8.0 | 24.0-26.0 | 3.0-5.0 |
| 2520 | ≤0.08 | ≤1.5 | ≤2.0 | ≤0.045 | ≤0.03 | 0.19-0.22 | 0.24-0.26 | - |
| 410 | ≤0.15 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | - | 11.5-13.5 | - |
| 430 | ≤0.12 | ≤0.75 | ≤1.0 | ≤0.040 | ≤0.03 | ≤0.60 | 16.0-18.0 | - |
Applications
1/8” hydraulic control line hydraulic control line use description
1/8” hydraulic control line, also known as capillary tube. It is
mainly used for downhole capillary pressure measurement in oil and
gas fields. It is the temperature and pressure sensor (also called
downhole permanent pressure gauge, generally nitrogen cylinder)
that goes downhole together with the oil and gas well production
string. A few kilometers deep oil and gas layer, then the 1/8”
hydraulic control line (capillary) is connected from the
temperature and pressure sensor to the fluorescent display on the
ground, so that the downhole temperature and pressure can be
transmitted to the ground through the capillary, through the ground
display The screen can read the instantaneous temperature and
pressure at the underground oil and gas layer to achieve real-time
monitoring of downhole temperature and pressure. It can also be
used for pressure control of ground safety valves and other ground
valves, as well as various connecting lines for oil and gas field
drilling and oil production equipment control systems.
1/4" hydraulic control line hydraulic control line use description
The 1/4" hydraulic control line is mainly used for the control of
the oil and gas well downhole safety valve and the over-cable
packer bleed valve. The 1/4" hydraulic control line is connected to
the downhole safety valve and air valve to control the oil and gas
through ground pressure. The downhole safety valve and the
over-cable packer bleed valve switch, after the set pressure is
reached, the oil and gas well downhole safety valve and the
over-cable packer bleed valve are simultaneously opened, and the
oil and gas well can be normally produced. At the same time, the
gas separated by the electric submersible pump can also be
discharged from the annulus through the deflation valve. If the
well is sprayed or normally shut down, the pressure of the control
line is released, so that the oil and gas well downhole safety
valve and the over-cable packer are placed. The gas valve is closed
at the same time, and the flow passages of the oil and gas well
tubing and the annulus are all blocked, thus ensuring the safety of
the well. Of course, the 1/4" hydraulic control line can also be
used separately for the control of downhole safety valves.
It can also be used for pressure control of ground safety valves
and other ground valves, as well as various connecting lines for
oil and gas field drilling and oil production equipment control
systems.
1/4" hydraulic control line hydraulic control line use description
The 1/4" hydraulic control line is mainly used for the control of
the oil and gas well downhole safety valve and the over-cable
packer bleed valve. The 1/4" hydraulic control line is connected to
the downhole safety valve and air valve to control the oil and gas
through ground pressure. The downhole safety valve and the
over-cable packer bleed valve switch, after the set pressure is
reached, the oil and gas well downhole safety valve and the
over-cable packer bleed valve are simultaneously opened, and the
oil and gas well can be normally produced. At the same time, the
gas separated by the electric submersible pump can also be
discharged from the annulus through the deflation valve. If the
well is sprayed or normally shut down, the pressure of the control
line is released, so that the oil and gas well downhole safety
valve and the over-cable packer are placed. The gas valve is closed
at the same time, and the flow passages of the oil and gas well
tubing and the annulus are all blocked, thus ensuring the safety of
the well. Of course, the 1/4" hydraulic control line can also be
used separately for the control of downhole safety valves.
It can also be used for pressure control of ground safety valves
and other ground valves, as well as various connecting lines for
oil and gas field drilling and oil production equipment control
systems.
3/8” hydraulic control pipeline hydraulic control pipeline use
description The 3/8” hydraulic control line is mainly used to
inject chemical into the oil and gas well. The 3/8” hydraulic
control line is connected to the downhole chemical injection valve,
and the descaling is performed through the 3/8” hydraulic control
line and the chemical injection valve. The chemical agent is
injected into the oil pipe at a certain depth from the ground to
effectively remove the fouling of the oil pipe and ensure the
normal production of the oil and gas field.
It can also be used for pressure control of ground safety valves
and other ground valves, as well as various connecting lines for
oil and gas field drilling and oil production equipment control
systems.
