|
[China]
Trade Verify
Address: No.208,Lvdi Road,Baihe Town,Qingpu District,Shanghai,China
Contact name:TOBO
TOBO STEEL GROUP CHINA |
|
Verified Suppliers
|
|
|
API 603 STAINLESS STEEL FLANGED END GLOBE VALVE CAST STEEL FLANGED GLOBE VALVE
Specification :
Size Range : 1/2"-12"
Valve Material : Stainless Steel
End Connections : Flanged
Stem and Disc Material : Stainless Steel
Rating: ASME Class 150/300, JIS 10K/20K, DIN PN16
| DN | 15 | 20 | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ø P | 15 | 20 | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 |
| Ø P1 | 17 | 20 | 25 | 32 | 39 | 50 | 65 | 80 | 100 | 125 | 150 | 200 |
| L | 130 | 150 | 160 | 180 | 200 | 230 | 290 | 310 | 350 | 400 | 480 | 600 |
| H ( opened ) | 193 | 194 | 203 | 212 | 263 | 273 | 305 | 344 | 378 | 420 | 483 | 606 |
| H ( closed ) | 178 | 180 | 188 | 191 | 235 | 238 | 270 | 297 | 344 | 375 | 429 | 525 |
| Ø B | 100 | 100 | 120 | 120 | 160 | 160 | 180 | 200 | 250 | 250 | 320 | 360 |
| Weight ( Kg ) | 3,3 | 3,9 | 5 | 6,6 | 9,5 | 12 | 17,3 | 22,7 | 35,8 | 52,8 | 72,5 | 126 |
| Actuation | handwheel |
| Connection | for mounting between ANSI 150 and DIN PN 10/16 pipe flanges. |
| DN: | 15, 20, 25, 32, 40, 50, 65, 80, 100, 125, 150, 200 |
| PN: | 16 |
| Seal Material | SS AISI 420 |
| Tmax | -10°C/+300°C |
| Valve Type | Globe valve, rising stem |
Carbon Steel ANSI 300 Flanged Globe Valve with metal seat. Designed and manufactured to BS 1873, Face to Face to ASME B16.10 with flanges to ASME B16.5, Tested by EN 12266-1. Stainless Steel reinforced graphite gasket and flexible graphite packing. 13CR reinforced seats and disc for greater durability and wear. Great for steam and high temperature applications. Globe Valves are also regularly used over gate valves or other manual control valves where the user wants to achieve a greater degree of flow control. As the shaft comes down it has a 'globe shape' on the bottom of it which slowly cuts down the flow before shutting off on the seat. All globe valves come with cast heat numbers to give quality assurance for testing and mil certificates.
There are three primary body designs for Globe valves, namely..
Tee Pattern or Z-body
Angle Pattern
Wye Pattern or Y-body body
Disk.. The most common disk designs for Globe valves are.. ball disk,
composition disk and the plug disk. Ball disk design is used
primarily in low pressure and low temperature systems. It is
capable of throttling flow, but in principle it is applied to stop
and start flow.
Composition disk design uses a hard, non-metallic insert ring on
the disk, which ensures a tighter closure.
Plug disk design provides better throttling than ball or
composition designs. They are available in many different designs
and they are all long and tapered.
Seat.. Globe valve seats are either integrated or screwed in to the valve
body. Many Globe valves have backseats inside the Bonnet. Back
seats provides a seal between the stem and Bonnet and prevents
system pressure from building against the valve pakking, when the
valve is fully open. Back seats are often applied in Globe valves.
Stem.. Globe valves uses two methods for connecting the disk and the
stem.. the T-slot and the disk nut construction. In the T-slot
design, the disk slides over the stem, while in the disk nut
design, the disk is screwed into the stem.
The following are some of the typical applications of Globe valves..
