Wuxi Talat Steel Co., Ltd. |
Verified Suppliers
|
|
4' x 8' Aisi Astm 201 304 316l Hairline 14 16 20 Gauge 304 Stainless Steel Sheet
There are two types of hot rolling and cold rolling according to
the manufacturing method. According to the structural
characteristics of the steel, it is divided into 5 categories:
austenite type, austenite-ferrite type, ferrite type, martensite
type and precipitation hardening type.
It is required to withstand the corrosion of various acids such as
oxalic acid, sulfuric acid-ferric sulfate, nitric acid, nitric
acid-hydrofluoric acid, sulfuric acid-copper sulfate, phosphoric
acid, formic acid, acetic acid, etc. It is widely used in chemical
industry, food, medicine, papermaking, petroleum, atomic energy,
etc. Industry, as well as various parts and components of
construction, kitchenware, tableware, vehicles, and household
appliances.
The stainless steel plate has a smooth surface, high plasticity,
toughness and mechanical strength, and is resistant to corrosion by
acids, alkaline gases, solutions and other media. It is an alloy
steel that does not rust easily, but not absolutely rust-free.
Stainless steel plates are divided into two types: hot-rolled and
cold-rolled, including thin cold plates with a thickness of 0.02-4
mm and medium and heavy plates with a thickness of 4.5-100 mm.
In order to ensure that the mechanical properties such as yield
strength, tensile strength, elongation and hardness of various
stainless steel plates meet the requirements, the steel plates must
undergo heat treatment such as annealing, solution treatment, and
aging treatment before delivery. 05.10 88.57.29.38 Special symbols
The corrosion resistance of stainless steel mainly depends on its
alloy composition (chromium, nickel, titanium, silicon, aluminum,
etc.) and internal structure, and the main role is chromium.
Chromium has high chemical stability and can form a passivation
film on the steel surface to isolate the metal from the outside
world, protect the steel plate from being oxidized, and increase
the corrosion resistance of the steel plate. After the passivation
film is destroyed, the corrosion resistance decreases.
Stainless Steel Sheet Parameter
Item | stainless steel sheets ( cold rolled) |
Thickness | 0.4~3.0mm |
Width | 1000mm, 1219mm, 1500mm, 2000mm, etc |
Length | 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
Standard | JIS, AISI, ASTM, GB, EN, etc |
Surface |
2B, , BA, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line,
|
Package | Shrink-wrapeed, carton boxes, wooden pallets, wooden boxes, wooden crates,etc |
Payment terms | L/C T/T (30%DEPOSIT) |
Delivery Time | 8-14 days |
Advantage
1. Corrosion resistance
Stainless steel has a similar resistance to general corrosion as
the unstable Nichrome 304. Prolonged heating in the temperature
range of chromium carbide degrees may affect Alloys 321 and 347 in
harsh corrosive media. Mainly used in high temperature
applications, which require strong resistance to sensitization of
the material to prevent intergranular corrosion at lower
temperatures.
2. High temperature oxidation resistance
Stainless steel plates are all resistant to high temperature
oxidation, however, the oxidation rate will be affected by inherent
factors such as exposure environment and product form.
3. Physical properties
The overall heat transfer coefficient of a metal depends on other
factors besides the thermal conductivity of the metal. In most
cases, the heat dissipation coefficient of the film, the scale and
the surface condition of the metal. Stainless steel keeps surfaces
clean, so it conducts heat better than other metals with higher
thermal conductivity.
Packing & Shipping
General characteristics
304 stainless steel plate has beautiful surface and diversified use
possibilities
304 stainless steel plate
304 stainless steel plate
Good corrosion resistance, long-lasting durability and better
corrosion resistance than ordinary steel
High strength, so the possibility of thin plate use is high
High temperature oxidation resistance and high strength, so it can
resist fire
Normal temperature processing, that is, easy plastic processing
Simple and easy maintenance because no surface treatment is
required
clean, high finish
Good welding performance