Active Member
|
[China]
Address: NO. 1015 Yushi Road Zhangpu Town Kunshan City Jiangsu Province
Contact name:Perry Ye
Nyhau Fluid Equipment Co.,Ltd |
|
|
Low Noise Sanitary Stainless Steel Centrifugal Pump Food Grade 20℃ Clean Water
Sanitary Centrifugal Pump Application
Sanitary Centrifugal Pump is a kind of highly-efficient and economic centrifugal pump. In addition to meeting the requirements for sanitation and soft treatment to products, it also has chemical stability. The GKH sanitary centrifugal pump is widely used for conveying various liquid materials in such fields as dairy, beer, beverage, medicine, biological engineering, fine chemical industry, etc. It can be used to convey ordinary solutions of low and medium viscosity, and solutions containing suspension or corrosive solutions.
The form of the GOBOR sanitary centrifugal pump is single stage, single suction and open-type impeller. The pump shell and impeller are elaborately designed to reduce the resistance and thoroughly eliminate the dead corner of sanitation. Thanks to its unique structure, the flow speed of liquid in the pump is enhanced, so that the integral performance of the pump is improved. It is provided with excellent sanitary performance, so it is easy to be cleaned.
It can meet the requirements for sanitation and soft treatment to products and has the chemical corrosion resistance.
Sanitary Centrifugal Pump Motor
1. The motor is designed and manufactured according to international standards International Electrotechnical Commission IEC34, IEC72
British Standard BS4999-5000
Australian Standard ASI 359-2
German Standard DIN 42673
Conforming to"CE"mark requirements
2. The motor conforms to the following standards GB 755-87
GB10069-88
Q/JBQS 28-20003. Excellent electric performance Low noise, low vibration Protection grade of high performance The standard protection grade of the motor is designed as lp54, IP55
According to user requirements, higher protection grade can be offered.
Suitable for use with double frequency and wide voltage.
Technical parameters
Maximum inlet pressure:0.5MPa Temperature range:-10℃+140℃(EPDM)
Noise level(at 1m):60-85dB(A)
Washable seal Hydraulic pressure: maximum 0.1MPa Water volume:0.25-0.5L/min Double end seal Hydraulic pressuremaximum 0.1MPa Water volume:0.25-0.5L/min
