Jiangsu Pucheng Metal Products Co.,Ltd. |
Verified Suppliers
|
|
China Manufacturer High Temperature Resistance AISI ASTM 304 304L 316 Stainless Steel Plate
Product Description
Stainless steel is short for acid-proof stainless steel, resistant to weak corrosive medium such as air, steam, water, or with a stainless steel grade is called stainless steel;And resistance to chemical corrosion medium (acid, alkali, salt and other chemical etching) corrosion of steel called acid-resistant steel.
Material | China Manufacturer High Temperature Resistance AISI ASTM 304 304L 316 Stainless Steel Sheet Price |
Standard | AISI JIS GB SUS ASTM EN DIN etc. |
Grade | Mainly201, 202, 304, 304L, 304H, 316, 316L,316Ti,2205, 330, 630, 660, 409L, 321, 310S, 410, 416, 410S, 430, 347H, 2Cr13, 3Cr13 etc |
300series:301,302,303,304,304L,309,309s,310,310S,316,316L,316Ti,317L,321,347 | |
200series:201,202,202cu,204 | |
400series:409,409L,410,420,430,431,439,440,441,444 | |
Others:2205,2507,2906,330,660,630,631,17-4ph,17-7ph, S318039 904L,etc | |
Duplex stainless steel:S22053,S25073,S22253,S31803,S32205,S32304 | |
Special Stainless Steel:904L,347/347H,317/317L,316Ti,254Mo | |
Technology | Hot/Cold Rolled |
Length | 100~12000 mm |
Width | 100~2000 mm |
Thickness | Cold Roll:0.1~3 mm |
Hot Roll:3~100 mm | |
Surface | BA/2B/NO.1/NO.3/NO.4/8K/HL/2D/1D |
Leveling: improve flatness, esp. for items with high flatness request. | |
Skin-Pass: improve flatness, higher brightness | |
Other Choices | Cutting:Laser cutting, help the customer to cut the required size |
Protection | 1. Inter paper available |
2. PVC protecting film available | |
Shipment Time | within 15-20 workdays after receiving deposit or L/C |
Price Item | FOB,CIF,DDU,FCA,EXW ,.etc |
Chemical Composition
Grade | C | Si | Mn | P | Ni | Cr | Mo |
201 | ≤0.15 | ≤0.75 | 5.5-7.5 | ≤0.06 | 3.5-5.5 | 16.0-18.0 | - |
202 | ≤0.15 | ≤1.0 | 7.5-10.0 | ≤0.06 | 4.-6.0 | 17.0-19.0 | - |
301 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.045 | 6.0-8.0 | 16.0-18.0 | - |
302 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.035 | 8.0-10.0 | 17.0-19.0 | - |
304 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.045 | 8.0-10.5 | 18.0-20.0 | - |
304L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | 9.0-13.0 | 18.0-20.0 | - |
309S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.045 | 12.0-15.0 | 22.0-24.0 | - |
310S | ≤0.08 | ≤1.5 | ≤2.0 | ≤0.035 | 19.0-22.0 | 24.0-26.0 | - |
316 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.045 | 10.0-14.0 | 16.0-18.0 | 2.0-3.0 |
316L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.045 | 12.0-15.0 | 16.0-18.0 | 2.0-3.0 |
321 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | 9.0-13.0 | 17.0-19.0 | - |
630 | ≤0.07 | ≤1.0 | ≤1.0 | ≤0.035 | 3.0-5.0 | 15.5-17.5 | - |
631 | ≤0.09 | ≤1.0 | ≤1.0 | ≤0.030 | 6.50-7.75 | 16.0-18.0 | - |
904L | ≤2.0 | ≤0.045 | ≤1.0 | ≤0.035 | 23.0-28.0 | 19.0-23.0 | 4.0-5.0 |
2205 | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.030 | 4.5-6.5 | 22.0-23.0 | 3.0-3.5 |
2507 | ≤0.03 | ≤0.80 | ≤1.2 | ≤0.035 | 6.0-8.0 | 24.0-26.0 | 3.0-5.0 |
2520 | ≤0.08 | ≤1.5 | ≤2.0 | ≤0.045 | 0.19-0.22 | 0.24-0.26 | - |
410 | ≤0.15 | ≤1.0 | ≤1.0 | ≤0.035 | - | 11.5-13.5 | - |
430 | ≤0.12 | ≤0.75 | ≤1.0 | ≤0.040 | ≤0.60 | 16.0-18.0 | - |
Grade | Tensile Strength (Mpa) | Yield Strength (Mpa) | Elogation(%) | Hardness (HRB) |
201 | ≥655 | ≥310 | ≥40 | ≤100 |
202 | ≥620 | ≥260 | ≥40 | ≤100 |
304 | ≥515 | ≥205 | ≥40 | ≤92 |
304L | ≥485 | ≥170 | ≥40 | ≤88 |
316 | ≥515 | ≥205 | ≥40 | ≤95 |
316L | ≥485 | ≥170 | ≥40 | ≤95 |
321 | ≥515 | ≥205 | ≥40 | ≤95 |
409 | ≥380 | ≥205 | ≥20 | ≤80 |
409L | ≥350 | ≥185 | ≥22 | ≤80 |
430 | ≥450 | ≥205 | ≥22 | ≤80 |
Detail Photos
Surface Refrence
Surface | Characteristic | Processing Technology |
N0.1 | Original | Pickled after hot rolling |
2D | Blunt | Hot rolling + annealing shot peening pickling + cold rolling +
annealing pickling |
2B | Blurred | Hot rolling + annealing shot peening pickling + cold rolling +
annealing pickling + tempering rolling |
N0.3 | Matte | Polishing and tempering rolling with 100-120 mesh abrasive
materials |
N0.4 | Matte | Polishing and tempering rolling with 150-180 mesh abrasive material |
NO.240 | Matte | Polishing and tempering rolling with 240 mesh abrasive materials |
NO.320 | Matte | Polishing and tempering rolling with 320 mesh abrasive materials |
NO.400 | Matte | Polishing and tempering rolling with 400 mesh abrasive materials |
HL | Brushed | Grind the surface of the steel belt with an appropriate grinding
grain size to make it show a certain longitudinal texture |
BA | Bright | The surface is annealed and shows high reflectivity |
6K | Mirror | Rough grinding and polishing |
8K | Mirror | Fine grinding and polishing |
Certification
Packing & Shipping
Packing | PVC waterproof paper packed , strong sea-worthy wooden package and
steel plate packing | |||
Shipping port | Shanghai | |||
Length: ≤6m, loaded in 20GP Container | ||||
Length: ≤12m, loaded in 40GP Container | ||||
Size of 20GP Container (inside :5898*2352*2393mm) | ||||
Size of 40GP Container (inside:12032*2352*2393mm) | ||||
Size of 40HQ Container (inside:12032*2352*2698mm) | ||||
Delivery time | Within 7-15 days, depending on the situation |
FAQ
Q1: ARE YOU FACTORY OR TRADER?
A1: Our company is a cold rolling manufacturer of magnetic stainless steel coil
since 2012. We've gained our Export Right and become an integrated
company of industry and trade in order to satisfy buyer's
multi-request on different material and products.
Q2: WHICH MATERIAL/PRODUCTS YOU CAN PROVIDE?
A2: Stainless Steel Coils / Strips, Stainless Steel Sheets /
Plates, Stainless Steel Circles / Discs, Decorative Stainless Steel
Sheets.
Q3: HOW TO GET A SAMPLE?
A3: FREE samples are available for your checking and testing.
And to get free samples, you need to send us you detailed receiving
address (including post code) and your DHL/FedEx/UPS account for
collecting samples, courier cost will be paid in your side.
Q4: HOW TO VISIT YOUR FACTORY?
A4: Most of the main cities have flights to Wuxi; you can
take flight to Wuxi Shuofang International Airport.
If you come from Shanghai, it will take 2 hours by flight (every
day 5 flights).
If you come from Hongkong, it will take 1 hour by flight (every day
1 flight around noon time).