|
[China]
Trade Verify
Address: Liangxi District Wuxi ,Jiangsu,China.
Contact name:Helen
Jiangsu Pucheng Metal Products Co.,Ltd. |
|
Verified Suppliers
|
|
|
Titanium Rods Per Kg ASTM B348 Gr1 Gr2 Ti6al4V Gr5 Titanium Forged Bar Price of 1kg Per Kg
Titanium alloy has high strength, low density, good mechanical properties, toughness and corrosion resistance. In addition, titanium alloys have poor process performance and are difficult to cut. In hot processing, it is very easy to absorb impurities such as hydrogen, oxygen, nitrogen, and carbon. There is also poor abrasion resistance and complex production processes. Industrial production of titanium began in 1948. The development of the aviation industry requires the titanium industry to develop at an average annual growth rate of about 8%
Product Description
| Titanium and Titanium Alloy Bars | ||||||
| Grade | Standard | Production method | Supply status | Specification | ||
| Thickness/mm | Width/mm | Length/mm | ||||
Gr1,Gr2,Gr3Gr4 Gr5,Gr7Gr9,Gr11 Gr12,Gr16,Gr17 | ASTM B265 ASTM F136 AMS 4911 | hot rolling | R | >4.75-60.0 | 400-3000 | 1000-4000 |
| M | ||||||
| cold rolling | Y | 0.30-4.75 | 400-2000 | 1000-3000 | ||
| M | ||||||
| ST | ||||||
| hot rolling | ST | >4.0-10.0 | 400-3000 | 1000-4000 | ||
| cold rolling | ST | 1.0-4.0 | 400-1000 | 1000-3000 | ||
| cold rolling | ST | 0.3-4.75 | 400-1000 | 1000-3000 | ||
| Tips: Negotiated by both sides, the supply exceeds the specifications of the table. | ||||||
Chemical Composition
| Grade | chemical composition, weight percent (%) | ||||||||||
| C | H | O | N | Fe | Al | V | Pd | Ni | Mo | Ti | |
| (≤) | (≤) | (≤) | (≤) | (≤) | - | - | - | - | - | bal | |
| GR1 | 0.08 | 0.015 | 0.18 | 0.03 | 0.2 | - | - | - | - | - | bal |
| GR2 | 0.08 | 0.015 | 0.25 | 0.03 | 0.3 | - | - | - | - | - | bal |
| GR4 | 0.08 | 0.015 | 0.25 | 0.03 | 0.3 | - | - | - | - | - | bal |
| GR5 | 0.08 | 0.015 | 0.2 | 0.05 | 0.4 | 5.5~6.75 | 3.5~4.5 | - | - | - | bal |
| GR7 | 0.08 | 0.015 | 0.25 | 0.03 | 0.3 | - | - | 0.12~0.25 | 0.12~0.25 | - | bal |
| GR9 | 0.08 | 0.015 | 0.15 | 0.03 | 0.25 | 2.5~3.5 | 2.5~3.5 | - | - | - | bal |
| GR11 | 0.08 | 0.15 | 0.18 | 0.03 | 0.2 | - | - | 0.12~0.25 | - | - | bal |
| GR12 | 0.08 | 0.15 | 0.25 | 0.03 | 0.3 | - | - | - | 0.6~0.9 | 0.2~0.4 | bal |
| GR23 | 0.08 | 0.125 | 0.13 | 0.03 | 0.25 | 5.5~6.5 | 3.5~4.5 | - | - | - | bal |
Physical Properties
| Grade | Physical properties | |||||
| Tensile strength | Yield strength | Elongation in 4D | Reduction of Area | |||
| Min | Min (0.2%, offset) | Min (%) | Min (%) | |||
| ksi | MPa | ksi | MPa | |||
| Gr1 | 35 | 240 | 20 | 138 | 24 | 30 |
| Gr2 | 50 | 345 | 40 | 275 | 20 | 30 |
| Gr4 | 80 | 550 | 70 | 483 | 15 | 25 |
| Gr5 | 130 | 895 | 120 | 828 | 10 | 25 |
| Gr7 | 50 | 345 | 40 | 275 | 20 | 30 |
| Gr9 | 90 | 620 | 70 | 483 | 15 | 25 |
| Gr12 | 70 | 483 | 50 | 345 | 18 | 25 |
| Gr23 | 120 | 828 | 110 | 759 | 10 | 15 |
Surface Description
| Surface | Definition | Application |
| No.1 | The surface finished by heat treatment and pickling or processes corresponding there to after hot rolling. | Chemical tank, pipe etc. |
| No.3 | Those finished by polishing with No.100 to No.120 abrasives specified in JIS R6001. | Kitchen utensils, Building construction etc. |
| No.4 | Those finished by polishing with No.150 to No.180 abrasives specified in JIS R6001. | Kitchen utensils, Building construction, Medical equipment etc. |
| 2B | Those finished, after cold rolling, by heat treatment, pickling or other equivalent treatment and lastly by cold rolling to given appropriate luster. | Medical equipment, Food industry, Construction material, Kitchen utensils etc. |
| BA (No.6) | Those processed with bright heat treatment after cold rolling. | Kitchen utensils, Electric equipment, Building construction etc. |
| Mirror (No.8) | Shinning like a mirror | Building construction, decoration etc. |
| Hairline | Those finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size. | Building Construction etc. |
Packaging & Shipping
FAQ
Q1: ARE YOU FACTORY OR TRADER?
A1: Our company is a cold rolling manufacturer of magnetic
stainless steel coil since 2012. We've gained our Export Right and
become an integrated company of industry and trade in order to
satisfy buyer's multi-request on different material and products.
Q2: WHICH MATERIAL/PRODUCTS YOU CAN PROVIDE?
A2: Stainless Steel Coils / Strips, Stainless Steel Sheets / Plates,
Stainless Steel Circles / Discs, Decorative Stainless Steel Sheets.
Q3: HOW TO GET A SAMPLE?
A3: FREE samples are available for your checking and testing. And to
get free samples, you need to send us you detailed receiving
address (including post code) and your DHL/FedEx/UPS account for
collecting samples, courier cost will be paid in your side.
Q4: HOW TO VISIT YOUR FACTORY?
A4: Most of the main cities have flights to Wuxi; you can take flight
to Wuxi Shuofang International Airport.
If you come from Shanghai, it will take 2 hours by flight (every
day 5 flights).
If you come from Hongkong, it will take 1 hour by flight (every day
1 flight around noon time).
