Home Companies JIANGSU MITTEL STEEL INDUSTRIAL LIMITED

SAE 8620RH Alloy Steel Round Bar Diameter 80mm 100mm 130mm 150mm 200mm 250mm

JIANGSU MITTEL STEEL INDUSTRIAL LIMITED

Contact Us

[China] country

Trade Verify

Address: No.283-1, Youyi Middle Road, Xishan District, Wuxi City, Jiangsu Province

Contact name:Gao

Inquir Now

JIANGSU MITTEL STEEL INDUSTRIAL LIMITED

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

SAE 8620RH Alloy Steel Round Bar Diameter 80mm 100mm 130mm 150mm 200mm 250mm

Country/Region china
City & Province wuxi jiangsu
Categories Asbestos Products
InquireNow

Product Details

SAE 8620H Alloy Steel Round Bar Diameter 80mm 100mm 130mm 150mm 200mm 250mm

 

Products Specification

 

Products Name

SAE8620 RH Steel Round Bar

Diameter10 - 300mm 
Length6m or custom cutting any length as request
TypeHot Rolled
BrandBAOSTEEL DELTA DONGBEI HUAXI SHAGANG.etc
MOQ1 Ton
Loading PortShanghai Port
Packingpacking by steel wire rope
Deliver time5 - 7 days  for stock materials
Other Grade

Q195,Q235,10#,20#,35#,45#,Q215,Q345,12Cr1Mov,

15CrMo,304,316,20Cr,40Cr,20CrMo,35CrMo,42CrMo,

40CrNiMo,GCr15,65Mn,50Mn,50Cr,3Cr2W8V,20CrMnTi,5CrMnMo 

StandardASTM GB EN DIN 
ApplicationStructure and Industrial

 

Introduction

Alloy steels comprise a variety of steels whose compositions exceed the limitations of C, Mo, Cr, Va, Mn, Ni, Si, and B, which have been fixed for carbon steels. These steels are more responsive to mechanical and heat treatments than carbon steels.

The following datasheet will provide details about AISI 8620H alloy steel.

Chemical Composition

The following table shows the chemical composition of AISI 8620H alloy steel.

ElementContent (%)
Iron, Fe96.745-98.22
Manganese, Mn0.600-0.950
Nickel, Ni0.350-0.750
Chromium, Cr0.350-0.650
Carbon, C0.180-0.230
Silicon, Si0.150-0.350
Molybdenum, Mo0.150-0.250
Sulfur, S0.0400
Phosphorous, P0.0350

Physical Properties

The physical properties of AISI 8620H alloy steel are outlined in the following table.

PropertiesMetricImperial
Density7.85 g/cm30.284 lb/in³

Mechanical Properties

The mechanical properties of annealed AISI 8620H alloy steel are tabulated below.

PropertiesMetricImperial
Tensile strength530 MPa76900 psi
Yield strength385 MPa55800 psi
Elastic modulus190-210 GPa27557-30458 ksi
Bulk modulus (typical for steel)140 GPa20300 ksi
Shear modulus (typical for steel)80 GPa11600 ksi
Poisson’s ratio0.27-0.300.27-0.30
Elongation at break (in 50 mm)3131
Reduction of area3131
Izod Impact115 J84.8 ft.lb
Hardness, Brinell149149
Hardness, Knoop (converted from Brinell hardness)169169
Hardness, Rockwell B (converted from Brinell hardness)8080
Hardness, Vickers (converted from Brinell hardness)155155
Machinability (annealed and cold drawn, based on 100 machinability for AISI 1212 steel)6565

Thermal Properties

The thermal properties of AISI 8620H alloy steel are tabulated below.

PropertiesMetricImperial
Thermal conductivity46.6 W/mK323 BTU in/hr.ft².°F

Other Designations

Equivalent materials to AISI 8620H alloy steel are listed below:

  • ASTM A304
  • SAE J1268
  • AFNOR 20 NCD 2
  • AFNOR 22 NCD 2
  • DIN 1.6523
  • UNI 20 NiCrMo 2
  • JIS SNCM 21
  • JIS SNCM 21 H
  • B.S. 805 H 20
  • B.S. 805 M 20

Hot Products

High Carbon 316 Stainless Steel Plates Laser Cutting Thickness 3.0 - 80.0mm SA240 Material 200 300 ...
Carbon 0.04% - 0.10% 316 Stainless Steel Plates Sheets Laser Cutting Plsma Cutting Without Burr ...
UNS S31600 / 316 Stainless Steel Plate Laser Cutting Round Shape / Square Shape With Hole Material ...
Hot Rolled Stainless Steel Plate 310 / 310S / 310H Heat Resistant Steel Plates Laser Cutting ...
ASTM A240 316 / 316L / 316H Stainless Steel Plate Hot Rolled NO.1 Finishing Square Plate Round ...
ASTM / EN / JIS Standard Stainless Steel Plates 321 321H Thickness 0.6 - 80.0mm from TISCO Material ...