|
[China]
Trade Verify
Address: No.283-1, Youyi Middle Road, Xishan District, Wuxi City, Jiangsu Province
Contact name:Gao
JIANGSU MITTEL STEEL INDUSTRIAL LIMITED |
|
Verified Suppliers
|
|
|
Products Specification
| Products Name | 1.8505 / 32CrAlMo7-10 Alloy Steel Round Bar |
| Diameter | 10 - 300mm |
| Length | 6m or custom cutting any length as request |
| Type | Hot Rolled |
| Brand | BAOSTEEL DELTA DONGBEI HUAXI SHAGANG.etc |
| MOQ | 1 Ton |
| Loading Port | Shanghai Port |
| Packing | packing by steel wire rope |
| Deliver time | 5 - 7 days for stock materials |
| Other Grade | Q195,Q235,10#,20#,35#,45#,Q215,Q345,12Cr1Mov, 15CrMo,304,316,20Cr,40Cr,20CrMo,35CrMo,42CrMo, 40CrNiMo,GCr15,65Mn,50Mn,50Cr,3Cr2W8V,20CrMnTi,5CrMnMo |
| Standard | ASTM GB EN DIN |
| Application | Structure and Industrial |
Regular Standard Size of our 32CrAlMo7-10 Round Bar in Stock
| Standard Diameter | 10 12 15 18 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 120 130 140 150 160 180 200 210 220 230 250 270 300 |
EN 1.8505 (32CrAlMo7-10) Nitriding Steel
EN 1.8505 steel is an alloy steel formulated for primary forming into wrought products. Cited properties are appropriate for the quenched and tempered condition. 1.8505 is the EN numeric designation for this material. 32CrAlMo7-10 is the EN chemical designation.
It has a fairly low thermal conductivity among EN wrought alloy steels. In addition, it has a moderately low melting temperature and a very high tensile strength.
The graph bars on the material properties cards below compare EN 1.8505 steel to: EN wrought alloy steels (top), all iron alloys (middle), and the entire database (bottom). A full bar means this is the highest value in the relevant set. A half-full bar means it's 50% of the highest, and so on.
Among alloy steels, the composition of EN 1.8505 steel is notable
for including aluminum (Al). Aluminum is used to control grain size
and to deoxidize. Deoxidizing is required to control the effects of
some other alloying elements.
Chemical composition % of steel 32CrAlMo7-10 (1.8505): EN
10085-2001
| C | Si | Mn | P | S | Cr | Mo | Al |
| 0.28 - 0.35 | max 0.4 | 0.4 - 0.7 | max 0.025 | max 0.035 | 1.5 - 1.8 | 0.2 - 0.4 | 0.8 - 1.2 |
Grade Specification of 32CrAlMo7-10 Alloy
| Grade : | 32CrAlMo7-10 | |
| Number: | 1.8505 | |
| Classification: | Nitriding steel | |
| Standard: |
| |
| Equivalent grades: | No information |
| Annealing | Quenching | Tempering | Normalizing | Q & T |
| √ | √ | √ | √ | √ |
Products Show
