|
[China]
Trade Verify
Address: H.Q.803, No.18 Baosheng Road, Songjiang, Shanghai, China
Contact name:Will Ma
Spezilla Tube Co., Ltd. (Shanghai) |
|
Verified Suppliers
|
|
|
ASTM-A270 Polished ID and OD Tubing Stainless Steel Sanitary Tube 25.4x1.5mm
Quick Detail:
Spezilla's ASTM A270 stainless steel sanitary pipe as well sanitary
stainless steel tube, meets A270 standards available in sanitary
stainless steel AISI 316L, 304L or 304 from 1” to 4” sizes, surface
finishing acording ASME BPE standards(Upon Request). To maintain
clean standards tubes are packed individually in plastic sleeves
and covered with plastic caps in both ends.
Stock of Stainless Steel Sanitary Pipe:
1. 1/2" through 4" (larger sizes available upon request)
2. 16 gauge (.065” wall),14 gauge (.083” wall), and additional
gauges available upon request.
3. ASME BPE and ASTM A270
4. Straight grade 304 or 304L and 316 or 316L and dual grade
304/304L and 316/316L available.
5. 20 foot lengths. Inside diameter and outside diameter to be
polished to customer’s specifications. Industrial mill finish, 180
grit ID and 150 grit OD polish, polish, and other finishes
available.
6. Material will meet the relevant specifications.
Applications:
For Dairy, Food, Beverage, and Other Sanitary Applications.
Available Sizes:
OD from 1/2'' to 8'' (12.7MM to 203.20MM)
Wall thickness: 0.065'' to 0.083'' (1.65MM to 2.11MM)
Length: 20ft ( 6100MM)
Materials Our sanitary tubing is available in alloys 304/304L and 316/316L.
All 316/316L tube is supplied with a sulfur content of .005-.017%
as specified in ASTM A270, Supp. S2.1.1. Available in A249, A269
and A270
Surface Polish:
Surface finish is 20 u-in Ra (0.5um) ID maximum, 30 u-in Ra (0.8um)
OD maximum surface roughness measured per ASME/ANSI B46.1 with the
profilo-meter reading at 90 degree to the lay. Other finishes
available upon request.
Various types of polishing operations are commonly used to reduce
the surface roughness of stainless steel sanitary tubes used in
fluid piping & related components. As the name implies,
mechanical polishing involves the application of physical force on
abrasive media to remove the irregularities.
Surface Roughness: Bright Annealed, Mill Finish is available for both ID/OD,
Mechanical Polish, Electro Polish needs to specify either ID/OD.
| Dimensional Tolerances ASTM A270 Stainless Steel Sanitary Pipe | ||||
| Size OD | Nominal Wall | Outside Diameter(MM) | Length | Wall |
| 1/2''(12.7) | 0.065''(1.65)/0.049''(1.25) | +/-0.005(0.13) | +1/8''(3.18)/-0 | +/-10.0% |
| 3/4''(19.05) | 0.065''(1.65)/0.049''(1.25) | +/-0.005(0.13) | +1/8''(3.18)/-0 | +/-10.0% |
| 1''(25.4) | 0.065''(1.65)/0.049''(1.25) | +/-0.005(0.13) | +1/8''(3.18)/-0 | +/-10.0% |
| 1-1/2''(38.1) | 0.065''(1.65)/0.049''(1.25) | +/-0.008(0.20) | +1/8''(3.18)/-0 | +/-10.0% |
| 2''(50.8) | 0.065''(1.65)/0.049''(1.25) | +/-0.008(0.20) | +1/8''(3.18)/-0 | +/-10.0% |
| 2-1/2''(63.5) | 0.065''(1.65) | +/-0.010(0.25) | +1/8''(3.18)/-0 | +/-10.0% |
| 3''(76.2) | 0.065''(1.65) | +/-0.010(0.25) | +1/8''(3.18)/-0 | +/-10.0% |
| 4''(101.6) | 0.083''(2.11) | +/-0.015(0.38) | +1/8''(3.18)/-0 | +/-10.0% |
| 6''(152.4) | 0.083''(2.11) | +/-0.030(0.76) | +3/16"(5.00)/-0 | +/-10.0% |
| 6''(152.4) | 0.109''(2.77) | +/-0.030(0.76) | +3/16"(5.00)/-0 | +/-10.0% |
| 8''(203.2) | 0.109''(2.77) | +/-0.050(1.25) | +3/16"(5.00)/-0 | +/-10.0% |
