Wenzhou Zheheng Steel Industry Co.,Ltd |
Verified Suppliers
|
|
Austenitic Seamless Stainless Steel Tubing ,316l ,X2CrNiMo17-12-2
,1.4404,1.5 inch ,2 inch ,2.5 inch ,3 inch
Zheheng steel deal with 316l ,X2CrNiMo17-12-2 ,1.4404, AusteniticSeamless Stainless Steel Tubing has different names in different standards, the European standard
is 1.4404, the chemical conforms to X5CrNiMo17-12-2 , and in the American standard we are generally called ,316l, referred to as ,316l Seamless Stainless Steel Tubing. Zheheng steel is a Chinese company specializing in the production
of various 1.5 inch ,2 inch ,2.5 inch ,3 inch , ,316l austenitic stainless steel seamless tubing. The products are strictly in accordance with the American
standard. European standard, Japanese standard implementation.
316L is a kind of molybdenum-containing stainless steel. Due to the
molybdenum content in steel, the total performance of this steel is
better than that of 310 and 304 stainless steel. Under high
temperature conditions, when the concentration of sulfuric acid is
lower than 15% or higher than 85%, 316L stainless steel has a wide
range. use. 316L stainless steel also has good resistance to
chloride attack and is therefore commonly used in marine
environments.
316L stainless steel has a maximum carbon content of 0.03 and can
be used in applications where annealing is not possible and maximum
corrosion resistance is required.
Grade | C ≤ | Si ≤ | Mn ≤ | P ≤ | S ≤ | Ni ≤ | Cr ≤ |
316L | 0.035 | 0.75 | 2 | 0.045 | 0.03 | 10.00-15.00 | 16.00-18.00 |
List of different names in different countries of the world (316l stainless steel seamless tubing)
NO | OLD steel grade | New steek grade(07.10) | JIS | ASTM | UNS | KS | BS EN | IS | IS | CNS |
14 | 00Cr17Ni14Mo2 | 022Cr17Ni12Mo2 | SUS316L | 316L | S31603 | STS316L | 1.4404 | ~02Cr17Ni12Mo2 | 316L | 316L |
Our Inspection and Test Procedure:
1.100% PMI,Spectro Chemical Aanlysis Test for Raw Material
2.100% Dimension & Visual Examination
3. Mechanical Properties Test Include Tension Test,Flaring Test
(For Seamless tube/pipe)/ Flange Test (For Welded Pipe & Tube),
Hardness Test ,Reversed Flattening Test
4.100% Hydrostatic Test or 100% NON-DESTRUCTIVE Test (ET or UT)
5.Radiographic Test for Welded Pipe (shall be accordance with
specification,or shall be as agreed upon between the purchaser and
vendor)
6.Straightness Test (optional)
7.Roughness Test (optional)
8.Intergranular Corrosion Test(optional)
9.Impact Test (optional)
10.Grain Size Determinations (optional)
NOTES : ALL THE TESTS AND INSPECTION RESULT NEED TO BE SHOWED IN
REPORTS ACCORDING TO STANDARD AND SPECIFICATION.
Our products Austenitic Seamless Stainless Steel Tubing ,316l ,X2CrNiMo17-12-2
,1.4404 packing show: