Home Companies Wenzhou Zheheng Steel Industry Co.,Ltd

1.4462 / 1.4362 Duplex Stainless Steel Metric Weldable S32750 Professional

Contact Us

[China]

Trade Verify

Address: No999 .wenzhou airport wenzhou city,zhejiang china

Contact name:BAIN SHEN

Wenzhou Zheheng Steel Industry Co.,Ltd

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

1.4462 / 1.4362 Duplex Stainless Steel Metric Weldable S32750 Professional

Country/Region	china
City & Province	wenzhou zhejiang

Product Details

W-Nr 1.4462, W-Nr 1.4417,W-Nr 1.4507,W-Nr 1.4501,W-Nr 1.4362,W-Nr 1.4410, W- duplex steel pipe

zheheng steel supply to you high quality W-Nr 1.4462 duplex steel pipe, W-Nr 1.4417 duplex steel pipe,W-Nr 1.4507 duplex steel pipe,W-Nr 1.4501 duplex steel pipe,W-Nr 1.4362 duplex steel pipe,W-Nr 1.4410 duplex steel pipe, W- duplex steel pipe, we are aslo W-Nr 1.4462 duplex steel pipe manufacturer , W-Nr 1.4417 duplex steel pipe exporter,W-Nr 1.4507 duplex steel pipe producer,W-Nr 1.4501 duplex steel pipe stockholder,W-Nr 1.4362 duplex steel pipe supplier,W-Nr 1.4410, W- duplex steel pipe

Duplex steel pipes general description:

1. Surface Pickling, annealing, polishing, bright, sand blast, hair line, etc.

2. Price Term Ex-work, FOB, CFR, CIF, or as required.

3. Payment Term T/T, L/C, Western Union.

4. MOQ 500kg

5. Delivery Time Prompt delivery or according to order's quantity.

6. Package

Export standard package: bundled wooden box, suit for all kinds of transport,or be required.

Duplex steel pipe details description:

1.	Item	s steel pipe
2.	Material	W-Nr 1.4417,W-Nr 1.4507,W-Nr 1.4501,W-Nr 1.4362,W-Nr 1.4410, W-Nr 1.4460,SAF 2205,SAF 2507,SAF 2304,etc.
3.	Specifications	Wall thickness	1.0-150mm(SCH10S-XXS)
		Outside diameter	3.0-2500mm(1/8"-100")
		Length	6m,5.8m,8m,11.8m,12m or as required.

Duplex steel pipe chemical composition:

Steel Grade	C≤	Mn≤	Si≤	S≤	P≤	Cr	Ni	Mo	Cu≤	N
S32750((SAF2507) 00Cr22Ni7Mo4N	0.03	1.20	0.80	0.020	0.035	24.0/ 26.0	6.0/ 8.0	3.0/ 5.0	0.50	0.24/ 0.32
S31803(SAF2205) 00Cr22Ni5Mo3N	0.03	2.00	1.0	0.02	0.030	21.0/ 23.0	4.50/ 6.50	2.50/ 3.50		0.08/ 0.20
S31500(3RE60) 00Cr18Ni5Mo3Si2	0.03	1.2/ 2.00	1. 4/ 2.00	0.030	0.030	18.0/ 19.0	4.25/ 5.25	2.50/ 2.00		0.05/ 0.10

Steel Grade	Heat Treatment℃	Ab(MPa)≥	As(MPa)≥	EL≥	HB	HRC
S32750(SAF2507) 00Cr22Ni5Mo3N	1025-1125	800	550	15	310	32
S31803(SAF2205) 00Cr22Ni5Mo3N	1020-1100	620	450	25	290	30.5
S31500(3RE60) 00Cr18Ni5Mo3Si2	980-1040	630	440	30	290	30.5

Product Analysis
1 An analysis of either one billet or one length of flat-rolled stock or one tube shall be made from each heat. The chemical composition thus determined shall conform to the
requirements specified.
2 A product analysis tolerance (see the annex table on Chemical Requirements (Product Analysis Tolerances) in SpecificationA 480/A 480M) shall apply. The product analysis
tolerance is not applicable to the carbon content for material with a specified maximum carbon of 0.04 % or less.
3 If the original test for product analysis fails, retests of two additional billets, lengths of flat-rolled stock, or tubes shall be made. Both retests for the elements in question shall meet the requirements of this specification; otherwise, all remaining
material in the heat shall be rejected or, at the option of the producer, each billet or tube may be individually tested for acceptance. Billets, lengths of flat-rolled stock, or tubes that do not meet the requirements of this specification shall be rejected.

Product show: