Foshan Nanhai Yuhua Hardware Products Co., Ltd. |
Verified Suppliers
|
|
ERW 304 Stainless Steel Pipe Spiral Pipe Decoiling 250mm Od
Three grades of stainless steel
Austenitic stainless steel
There are two main characteristics of this type of stainless steel. First, there is a lot of chromium included during the production of austenitic stainless steel. Items produced with this material are more corrosion-resistant. Second, these items tend to be non-magnetic, although they can become magnetic with a cold forming process. These are the most common types of stainless steel alloys.
Ferritic Stainless Steel
This type of stainless steel is the second most common type of alloy and is also magnetic. Items produced with this alloy can be hardened through cold forming and also tend to be less expensive than other types due to the lower nickel content.
Martensitic Stainless Steel
This material is the least common type of stainless steel alloy. Martensitic stainless steel is used in applications where high tensile strength is needed or a lot of impact resistance. In many cases, this material is also combined with a protective polymer coating to improve corrosion-resistance
Different Grades of Stainless Steel Alloys
Within the three primary categories mentioned above, there are also different grades of stainless steel.
304 Stainless Steel Pipe Specification
Name | ERW 304 Stainless Steel Pipe Spiral Pipe Decoiling 250mm Od |
Items | 304L Stainless Steel Pipe |
Standard | ASTM A554 |
Material Grade | 201: Ni 0.7%--1% |
304: Ni 8%, Cr 18% | |
316L:Ni10%,Cr16% | |
OD | 250mm |
Thickness | 1mm |
Length | 1m, or as customers' request |
Tolerance | a) Outer Diameter: +/- 0.2mm |
b) Thickness: +/- 0.03mm | |
c) Length: +/- 5mm | |
Surface | annealing,pickling |
sandblasting | |
Application | industry,exhausting,welding,furniture,window |
Test | Squash test, extended test, water pressure test,heat treatment, NDT |
Available Sizes
DN | ID mm | OD mm | Thickness | Material | Pipe ripple |
12 | 12 ±0.2 | 16 ±0.2 | 0.25 / 0.30mm | SUS304L | Annular wave |
16 | 16 ±0.2 | 20 ±0.2 | 0.25 / 0.30mm | SUS304L | Annular wave |
20 | 20 ±0.3 | 25 ±0.3 | 0.25 / 0.30mm | SUS304L | Annular wave |
25 | 25 ±0.4 | 32 ±0.4 | 0.25 / 0.30mm | SUS304L | Annular wave |
32 | 32 ±0.4 | 42 ±0.4 | 0.25 / 0.30mm | SUS304L | Annular wave |