Home Companies Anping Qianpu Wire Mesh Products Co., Ltd.

SS316L Twill Weave Wire Mesh Cloth 500Mesh 0.001" Wire 25um Opening

Contact Us

[China]

Trade Verify

Address: Chengdong Development Zone, Anping City, He Bei Province, China

Contact name:DONG WENREN

Anping Qianpu Wire Mesh Products Co., Ltd.

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

SS316L Twill Weave Wire Mesh Cloth 500Mesh 0.001" Wire 25um Opening

Country/Region	china
Categories	Steel Wire Mesh

Product Details

SS316L Twilled Weave Wire Cloth 500Mesh 0.001" Wire 25um Opening

Stainless Steel Twill Weave Square Wire Cloth Introduction:

Twill Weave Mesh is fabricated by passing every shute wire alternately up and down of two warp wires. The pattern is staggered on following warp wires, providing a parallel diagonal lines appearance. Twill Weave Wire Mesh permits the use of relatively heavier wires in the specific mesh count than is feasible in the plain weave mesh. This mesh has broad application tendency of supporting larger loads and finer filtrations.

500 mesh twill weave stainless steel wire mesh including 500 wires and openings per inch. Using 0.001" diameter wire, by twill weaving, woven 500 mesh opening for 0.025mm liquid or gas filter. This wire diameter and mesh with ratio reasonable, therefore weave structure is very strong. After 13 whole weaving process, so that the mesh surface flatness better.

Mesh	Weave Pattern	Wire Diameter		Aperture		Open Area Rate
Mesh	Weave Pattern	mm	Inch	mm	Inch	%
500	Twilled Weave	0.025	0.001	0.025	0.001	25
1) Roll Size Roll Width: 36”, 48”, 1.0m Roll Length: 100ft, 30m 2) Cut in Pieces Rectangle shape, square shape, round shape and other required shapes and sizes.

Materials:

SS304, SS304L, SS316, SS316L and Other Stainless Steel Alloy. Aluminum, Brass, Nickel, Hastelloy and other metal are available.

Specifications:

Standard Roll Width: 1m or 48";

Standard Roll Length: 30m or 100ft.

Twill Weave Wire Mesh
Mesh	Mesh Opening		Wire Diameter		Open Area
Mesh	Inch	MM	Inch	MM	(%)
4	0.215	5.460	0.0350	0.890	74.00%
8	0.105	2.667	0.0200	0.508	70.60%
12	0.065	1.651	0.0180	0.457	60.80%
14	0.062	1.585	0.0090	0.228	76.40%
35	0.017	0.422	0.0120	0.305	33.60%
40	0.017	0.419	0.0085	0.216	43.60%
45	0.013	0.324	0.0095	0.241	32.80%
58	0.013	0.324	0.0045	0.114	54.60%
66	0.011	0.269	0.0045	0.114	49.40%
70	0.008	0.198	0.0065	0.165	29.70%
90	0.006	0.155	0.0050	0.127	30.30%
100	0.006	0.140	0.0045	0.114	30.30%
100	0.005	0.127	0.0050	0.127	25.00%
110	0.005	0.117	0.0045	0.114	25.50%
120	0.004	0.109	0.0040	0.102	26.80%
130	0.004	0.109	0.0034	0.086	31.10%
130	0.004	0.099	0.0038	0.097	25.60%
140	0.004	0.097	0.0033	0.084	28.60%
160	0.004	0.097	0.0024	0.061	37.90%
180	0.004	0.095	0.0018	0.045	45.70%
170	0.004	0.089	0.0024	0.061	35.10%
180	0.003	0.086	0.0023	0.058	34.70%
180	0.003	0.079	0.0025	0.063	30.60%
200	0.003	0.074	0.0021	0.053	33.60%
200	0.003	0.069	0.0023	0.058	29.20%
270	0.002	0.053	0.0016	0.040	32.20%
325	0.002	0.043	0.0014	0.036	29.70%
400	0.033	0.0013	0.030	0.0011	27.83%
500	0.025	0.0010	0.025	0.0009	25.79%
600	0.024	0.0009	0.018	0.0007	33.03%
635	0.025	0.0009	0.015	0.0005	39.06%

Other specifications according to your requirements.

Weaving Type: Twill Weave

Standard Type of Stainless Steel Twilled Weave Square Hole Wire Mesh

Twilled weave: In a twill weave, each weft or filling yarn floats across the warp yarns in a progression of interlaces to the right or left, forming a distinct diagonal line. This diagonal line is also known as a wale. A float is the portion of a yarn that crosses over two or more yarns from the opposite direction.

Features:

Durability with good abrasion resistance.
Smooth surface.
Square mesh.
Good chemical resistance, especially against solvents.
Excellent mechanical strength.
Easy to cut to size with wire cutters, tin snips or metal shears.

Applications:

Filters and Laboratories
Electronic Ciggaretts for Wicking Material
Seiving and Straining of the Fines Powders
Injection Powders
Dusts Selection
Screening Chemical Additives
Oil Fine Filter
Gas Flow Control