|
[China]
Trade Verify
Address: Chengdong Development Zone, Anping City, He Bei Province, China
Contact name:DONG WENREN
Anping Qianpu Wire Mesh Products Co., Ltd. |
|
Verified Suppliers
|
|
|
Lock crimped is a refinement of the intermediate crimped. It can lock the wire at their position through pressed at each side of the raised wire. This structure can add the stability of the crimped woven wire mesh.
“Lock crimp” is a crimp type that is commonly employed when woven wire mesh is manufactured. Similar to intermediate crimp, “lock crimp” is also comprised of pre-crimped wires. The distinguishing feature of lock crimp is the bump or knuckle that forms over each intersecting set of wires. These knuckles lock the mesh in place and create an extremely rigid product. And finally, the wires on a lock crimp are straight between intersections, while the wires with the intermediate crimp are corrugated.
Lock Crimp Wire Meshes are mainly used in the architectural & decorative industries, for the screen of window, fence and ceiling; In the mining & aggregate industries, for the quarrying screen of vibrating machine; In the petrochemical & chemical industries, for test sieve.
Opening Sizes: from 4mm to 100mm.
Wire Diameters: from 0.8mm to 4.8mm.
Roll Width: 1m, 1.22m, 1.5m to 4m.
Roll Length: 15m, 30m to 60m.
Panel Width: 0.5m, 0.914m, 1m, 1.22m to 2m.
Panel Length: 1m, 1.22m, 1.5m to 6m.
| Lock Crimp Wire Mesh | ||||
| Opening | Wire Diameter | Open Area | ||
| mm | Inch | mm | Inch | % |
| 4.0 | 0.157 | 1.0 | 0.039 | 64.00 |
| 0.8 | 0.031 | 69.44 | ||
| 5.0 | 0.197 | 1.2 | 0.047 | 65.04 |
| 1.0 | 0.039 | 69.44 | ||
| 0.8 | 0.031 | 74.32 | ||
| 6.0 | 0.236 | 2.0 | 0.079 | 56.25 |
| 1.8 | 0.071 | 59.17 | ||
| 1.6 | 0.063 | 62.33 | ||
| 1.4 | 0.055 | 65.74 | ||
| 1.2 | 0.047 | 69.44 | ||
| 1.0 | 0.039 | 73.47 | ||
| 8.0 | 0.315 | 2.0 | 0.079 | 64.00 |
| 1.8 | 0.071 | 66.64 | ||
| 1.6 | 0.063 | 69.44 | ||
| 1.4 | 0.055 | 72.43 | ||
| 1.2 | 0.047 | 75.61 | ||
| 1.0 | 0.039 | 79.01 | ||
| 10.0 | 0.394 | 2.5 | 0.098 | 64.00 |
| 2.0 | 0.079 | 69.44 | ||
| 1.8 | 0.071 | 71.82 | ||
| 1.6 | 0.063 | 74.32 | ||
| 1.5 | 0.059 | 75.61 | ||
| 1.4 | 0.055 | 76.95 | ||
| 1.2 | 0.047 | 79.72 | ||
| 1.0 | 0.039 | 82.64 | ||
| 12.0 | 0.472 | 4.0 | 0.157 | 56.25 |
| 3.5 | 0.138 | 59.93 | ||
| 2.6 | 0.102 | 67.55 | ||
| 1.5 | 0.059 | 79.01 | ||
| 12.7 | 1/2” | 4.0 | 0.157 | 57.83 |
| 3.5 | 0.138 | 61.46 | ||
| 3.0 | 0.118 | 65.43 | ||
| 2.5 | 0.098 | 69.81 | ||
| 2.0 | 0.079 | 74.64 | ||
| 1.8 | 0.071 | 76.71 | ||
| 15.0 | 0.591 | 4.8 | 0.189 | 57.39 |
| 4.5 | 0.177 | 59.17 | ||
| 4.0 | 0.157 | 62.33 | ||
| 3.5 | 0.138 | 65.74 | ||
| 3.0 | 0.118 | 69.44 | ||
| 2.6 | 0.102 | 72.63 | ||
| 2.5 | 0.098 | 73.47 | ||
| 2.0 | 0.079 | 77.85 | ||
| 19.0 | 0.748 | 4.8 | 0.189 | 63.73 |
| 4.0 | 0.157 | 68.24 | ||
| 3.5 | 0.138 | 71.30 | ||
| 20.0 | 0.787 | 4.8 | 0.189 | 65.04 |
| 4.5 | 0.177 | 66.64 | ||
| 4.0 | 0.157 | 69.44 | ||
| 3.5 | 0.138 | 72.43 | ||
| 3.0 | 0.118 | 75.61 | ||
| 2.5 | 0.098 | 79.01 | ||
| 2.0 | 0.079 | 82.64 | ||
| 25.0 | 0.984 | 4.8 | 0.189 | 70.37 |
| 3.5 | 0.138 | 76.94 | ||
| 3.0 | 0.118 | 79.71 | ||
| 2.0 | 0.079 | 85.73 | ||
| 25.4 | 1” | 4.8 | 0.189 | 70.74 |
| 4.5 | 0.177 | 72.16 | ||
| 4.0 | 0.157 | 74.64 | ||
| 3.5 | 0.138 | 77.25 | ||
| 3.0 | 0.118 | 79.99 | ||
| 2.5 | 0.098 | 82.88 | ||
| 30.0 | 1.181 | 4.8 | 0.189 | 74.32 |
| 4.5 | 0.177 | 75.61 | ||
| 4.0 | 0.157 | 77.85 | ||
| 3.5 | 0.138 | 80.20 | ||
| 3.0 | 0.118 | 82.64 | ||
| 2.5 | 0.098 | 85.21 | ||
| 38.1 | 1-1/2” | 4.8 | 0.189 | 78.87 |
| 4.5 | 0.177 | 79.99 | ||
| 4.0 | 0.157 | 71.90 | ||
| 3.5 | 0.138 | 83.88 | ||
| 3.0 | 0.118 | 85.93 | ||
| 2.5 | 0.098 | 88.06 | ||
| 50.8 | 2” | 4.8 | 0.189 | 83.48 |
| 4.5 | 0.177 | 84.39 | ||
| 4.0 | 0.157 | 85.93 | ||
| 3.5 | 0.138 | 87.52 | ||
| 3.0 | 0.118 | 89.16 | ||
| 70.0 | 2.756 | 4.8 | 0.189 | 87.58 |
| 76.2 | 3” | 4.8 | 0.189 | 88.50 |
| 4.5 | 0.177 | 89.16 | ||
| 4.0 | 0.157 | 90.27 | ||
| 3.5 | 0.138 | 91.41 | ||
| 88.9 | 3-1/2” | 3.5 | 0.138 | 92.57 |
| 101.6 | 4” | 4.8 | 0.189 | 91.18 |
Other Specifications according to your requirements.
Weave Pattern: Lock Crimped
Standard materials of flat top crimped wire mesh are low/mild/high carbon steel and stainless steel 304, 304L, 316, 316L
Besides above following material available:
Copper: brass, pure copper, phosphor bronze
Aluminum: 1050, 1060, 1100, 5052, 5056
Nickel: pure nickel, nickel alloy, monel
Wire diameter and mesh with ratio reasonable;
Flat surface;
Strong wear resistance;
Corrosion and rust resistance;
Acid and alkali resistance;
Pre-weaving crimped wire, with strong structure.
Car grille
Architecture
Decorative grill
Vibrating screens
Machine guard
Test sieve
Fence
