Active Member
|
[China]
Address: No. 2503 Room,3B Buiding,ShiFu Road,LuCheng District,Wenzhou City,China
Contact name:Mark Fuel
HAINER STEEL INDUSTRIAL CO.,LIMITED |
|
|
DIN17460 DIN17441 304 316 430 Hot Rolled Stainless Steel Coil , Thin Thick 0.15mm
Quick Detail:
Standard:JIS, AISI, ASTM, GB, DIN,SUS
Thickness:0.15-2.5mm
Diameter:90-810mm
Shape:Round sheet
Application:Kitchenware, decoration, construction and building
ornament, product parts manufacturing and stainless steel products
tooling and so on
Surface Treatment:2B, BA, Hair Line, No.1,No.4, Mirror Finish
Certification:SGS
Technique:Cold rolled
Cr Content:12.5-13.5%
Sample:FREE SAMPLES can be sent on request. We promise to provide
our valued clients with high quality products, low price, and
excellent client services.
Surface
Surface Finished | Characteristics | Application |
BA | Bright heat treatment after cold rolling. | Ktchen utenstil, Kitchen ware, Architectural purpose. |
2B | Finished by heat treatment, pickling after cold rolling, followed by skin pass line to more brighter and smooth surface. | General application medical instruments, Tableware. |
NO.1 | Finished by hot-rolling, annealing and pickling, characterized by white pickled surface. | Chemical industry equipment, Industrial tanks. |
8K(mirror) | A mirror-like reflective surface by polishing with finer abrasives over 800 mesh. | Refletor, Mirror, Interior- Exterior decoration for building. |
Hair Line | Finished by continuous linear polishing. | Architecture industries, Escalators, Kitchen ware, Vehicles. |
Packaging & Shipping
Standard export seaworthy packing (with waterproof paper, metal belt pack sheet, then put them in wooden pallet, then put in container) or customized.
Applications
We,this material stainless steel plates be widely used in kinds of industries:
Specifications
Designation: A240/A 240M-04a
Standard specifications For Chromium and Chromium-Nickel Stainless Steel Plate,Sheet, and Strip for Pressure Vessels and for General Applications
Section 11 | No.1 Finish → Hot-rolled,annealed and descaled. No.2D Finish → Cold-rolled,dull finish No.2B Finish → Cold-rolled,bright finish Bright Annealed Finish → A bright cold-rolled finish retained by final annealing in a controlled atmosphere furnace No.3 Finish → Intermediate polished finish,one or both sides No.4 Finish → General purpose polished finish,one or both sides No.6 Finish → Dull satin finish,Tampico brushed,one or both sides No.7 Finish → High luster finish No.8 Finish → Cold-worked to obtain specified properties. |
Section 12 | No.1 Finish → Cold-rolled to specified thickness,annealed and descaled No.2D Finish → Same as No.1 finish,followed by a final light cold-roll pass,generally on highly polished rolls Bright Annealed Finish → A bright cold-rolled finish retained by final annealing in a controlled atmosphere furnace TR Finish → Cold-work to obtain specified properties Polished Finish → Stainless steel strip is also available in polished finishes such as No.3 and No.4,which are explained in Note4. |
Section 13 | Hot-rolled or Cold-rolled,and Annealed or Heat treated → Scale not removed,an intermediate finish,Use of plates in this condition is generally confined to heat-resisting applications. Scale impairs corrosion resistance. Hot-rolled or Cold-rolled,and Annealed or Heat treated,and Blast cleaned or Pickled → Condition and finish commonly preferred for corrosion-resisting and most heat-resisting applications, essentially a No.1 Finish. Hot-rolled or Cold-rolled,and Annealed or Heat treated,and surface cleaned and polishe → Polish finish is generally No.4 Finish. Hot-rolled or Cold-rolled,and Annealed or Heat treated,and Descaled; and Cold-rolled, and Annealed Or Heat treated,and Descaled,and Optionally temper passed → Smooth finish with greater freedom from surface imperfections than in 13.1.4 |
Section 14 | No.1 Edge → A rolled edge,either round or square as specified No.3 Edge → An edge produced by slitting. No.5 Edge→ An approximately square edge produced by rolling or filing after slitting |
Our advantage
