Active Member
|
[China]
Address: Wealth Center,Economic Development Zone,Liaocheng City,Shandong Province,Zip Code 252000,China.
Contact name:Zhang
Shandong Modern International Trade Co., Ltd. |
|
|
ASTM A480 440A 440B 440C stainless steel sheet used for knives
Product Description
The carbon content and hardness of 440A-440B-440C are gradually increased from A-B-C (A-0.75%, B-0.9%, C-1.2%). 440C is an excellent high-end stainless steel, and its hardness usually reaches 56-58RC. All three steels have good rust resistance, 440A is the best, and 440C is the lowest. 440C is very common.
| Chemical Composition | |||||||
| Material | C | Si | Mn | P | S | Cr | Mo |
| 440A | 0.60~0.75 | ≤1.00 | ≤1.00 | ≤0.040 | ≤0.030 | 16.0~18.0 | ≤0.75 |
| 440B | 0.75~0.95 | ≤1.00 | ≤1.00 | ≤0.040 | ≤0.030 | 16.0~18.0 | ≤0.75 |
| 440C | 0.95~1.20 | ≤1.00 | ≤1.00 | ≤0.040 | ≤0.030 | 16.0~18.0 | ≤0.75 |
| Grade | UNS No | Old British | Euronorm | Swedish SS | Japanese JIS | ||
| BS | En | No | Name | ||||
| 440A | S44002 | - | - | SUS 440A | |||
| 440B | S44003 | 1.4112 | X90CrMoV18 | SUS 440B | |||
| 440C | S44004 | - | - | 1.4125 | X105CrMo17 | - | SUS 440C |
Grade 440 stainless steels find applications in the following:
1D—The surface has discontinuous particles, which is also called matte. Processing technology: hot rolling + annealing shot peening pickling + cold rolling + annealing pickling.
2D—Slightly shiny silver-white. Processing technology: hot rolling + annealing shot peening pickling + cold rolling + annealing pickling.
2B—Silver white and better gloss and flatness than 2D surface. Processing technology: hot rolling + annealing shot peening pickling + cold rolling + annealing pickling + quenching and tempering rolling.
BA—The surface gloss is excellent and has a high reflectivity, just like the mirror surface. Processing technology: hot rolling + annealing shot peening pickling + cold rolling + annealing pickling + surface polishing + quenched and tempered rolling.
No.3—has better gloss and rough surface. Processing technology: Polishing and tempering rolling of 2D products or 2B with 100 ~ 120 abrasive materials.
No.4—has better gloss and fine lines on the surface. Processing technology: Polishing and tempering rolling of 2D products or 2B with 150 ~ 180 abrasive materials.
HL—Silver gray with hair streaks. Processing technology: Polish the 2D product or 2B product with a suitable size of abrasive material to make the surface appear continuous grain.
MIRRO—is in a mirror state. Processing technology: 2D or 2B products are ground and polished to a mirror effect with a suitable abrasive material.
Products' Photos
